Bedfordshire · England
Bespoke Mirrors in Bedfordshire
Bespoke mirrors in Bedfordshire start with a survey of the wall and its flatness, followed by a written quote that fixes the price for the mirror, edges and fixing shown.
- Guide from £205
- 6 towns covered
- Postcode areas LU, MK, SG
Made to measure mirrors for homes and businesses in Bedfordshire
Large mirrors are usually fixed with mirror adhesive and supported at the base by a slim channel or clips while the adhesive cures and afterwards. Smaller mirrors can be screw-fixed through drilled holes with decorative caps, which also lets them be removed later.
Most mirrors for internal use are made from silver-coated float glass covered by BS EN 1036-1, which sets definitions, quality requirements and test methods, including resistance to damp and corrosion. Mirror for bathrooms or other humid areas should come from a supplier whose product meets that standard.
A bonded mirror follows the surface behind it, so an uneven wall can bend the reflection. We check flatness at survey, and on uneven plaster or stone walls the mirror may need a flat backing board or the wall levelling first to avoid a wavy, distorted image.
Black edges, often called edge creep, are corrosion of the silver layer, usually started by moisture or cleaning fluid getting into the edges, or by an unsuitable adhesive. Once the silver has corroded it cannot be restored, so the mirror has to be replaced.
What applies in Bedfordshire
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Bedfordshire is inland, around 72 km from the nearest coast at its closest point, so salt exposure is rarely a factor.
Large mirrors for flats, salons and gyms often have to travel through narrow stairwells and small lifts, so walls may be covered in several panels with planned joints. Loading limits and building working hours can affect fitting times.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Polished mirror, 1200 × 900 mm | £205 – £265 |
| Safety-backed mirror, 1800 × 1000 mm | £365 – £465 |
| Gym mirror wall, 4000 × 2000 mm | £995 – £1,295 |
Choosing your bespoke mirrors
Clear silver mirror
Standard silver-coated float glass mirror, cut to size, suited to most rooms, wardrobes and wall mirrors where a true, neutral reflection is wanted.
Low-iron mirror
Mirror made on low-iron glass, which reduces the slight green cast of standard glass for a brighter, more colour-accurate reflection.
Bevelled edge
An angled border ground and polished around the edge that catches the light and frames the mirror without needing a separate frame.
Tinted mirror
Grey or bronze tinted mirror that softens the reflection and adds warmth or depth, often used as a feature wall or in hospitality spaces.
Bespoke Mirrors in Bedfordshire: questions
What affects the cost of a bespoke mirror?
The main cost drivers are the size and thickness of the mirror, the number of panels, the edge finish, any tint or low-iron glass, safety backing, cut-outs and the fixing method. Very large single sheets, access through narrow stairs and full mirror walls also affect the price. See the guide prices for typical ranges.
How should I clean a mirror without damaging it?
Spray glass cleaner onto a soft, lint-free cloth rather than directly onto the mirror, then wipe and buff dry. That stops liquid running down and soaking into the bottom edge, which is where black edges usually start. Avoid abrasive pads and harsh chemical cleaners, and dry the edges after cleaning in bathrooms.
Can a large mirror be fixed to plasterboard?
Often, yes, but it depends on the board, its fixings and the surface finish. Adhesive grips the paint or plaster layer, so flaky paint or weak skim can let go under the weight. We check the wall at survey and may add a base channel, mechanical fixings into studs, or a backing board to spread the load.
What is a safety-backed mirror and do I need one?
A safety-backed mirror has a film bonded across its back that holds the pieces together if the glass breaks. You should consider one wherever someone could knock or fall against the mirror, such as wardrobe doors, full-height mirrors, gyms, dance studios and children's rooms. We recommend it at survey when the position or use of the room calls for it.
Which parts of Bedfordshire do you cover for bespoke mirrors?
We cover the whole of Bedfordshire, including Luton, Bedford, Dunstable, Leighton Buzzard and Ampthill, and postcode areas LU, MK, SG. Building rules for bespoke mirrors here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Bedfordshire
- Replacement Glass in Bedfordshire
- Misted Glass Repair in Bedfordshire
- Emergency Glazing in Bedfordshire
- Safety Glass in Bedfordshire
- Window Repairs in Bedfordshire
- Window Film in Bedfordshire
- uPVC Windows in Bedfordshire
- Aluminium Windows in Bedfordshire
- Sash Windows in Bedfordshire
- Composite Doors in Bedfordshire
- Bifold Doors in Bedfordshire
- Sliding Doors in Bedfordshire
- Secondary Glazing in Bedfordshire
- Roof Lanterns in Bedfordshire
- Glass Balustrades in Bedfordshire
- Frameless Glass in Bedfordshire
- Shower Screens in Bedfordshire
- Glass Splashbacks in Bedfordshire
- Glass Roofs in Bedfordshire
- Shopfront Glazing in Bedfordshire
- Curtain Walling in Bedfordshire
- Glass Partitions in Bedfordshire
- Property Glazing in Bedfordshire
Get a written quote in Bedfordshire
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.