Scottish Borders · Scotland
Bespoke Mirrors in Scottish Borders
Need a mirror wall for a gym, studio or salon in Scottish Borders? We can quote for safety-backed mirror panels with neat joints, fixed with adhesive made for mirror backing.
- Guide from £205
- 7 towns covered
- Postcode areas EH, TD
Bespoke mirrors for homes and businesses in Scottish Borders
A safety-backed mirror has a film bonded across its back that holds the pieces together if the glass breaks, so fragments stay on the backing instead of falling or scattering. Some backing films are classified for impact under BS EN 12600, and the film is applied before fitting.
A bonded mirror follows the surface behind it, so an uneven wall can bend the reflection. We check flatness at survey, and on uneven plaster or stone walls the mirror may need a flat backing board or the wall levelling first to avoid a wavy, distorted image.
Mirrors must be bonded with an adhesive made to be compatible with mirror backing. Some general-purpose adhesives and acidic sealants can attack the protective coatings and the silver, causing dark patches that spread from behind. We only use mirror-compatible products.
Large mirrors are usually fixed with mirror adhesive and supported at the base by a slim channel or clips while the adhesive cures and afterwards. Smaller mirrors can be screw-fixed through drilled holes with decorative caps, which also lets them be removed later.
What applies in Scottish Borders
Section 4 (Safety) of the Scottish Technical Handbooks covers glazing that people could collide with, such as glass in and beside doors and low-level glazing, where safety glass is needed.
Scottish Borders has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Mirrors are fitted indoors, but salty, humid coastal air can still reach the silver backing through exposed edges, particularly in bathrooms and near entrances. Protected edges, a compatible adhesive and good ventilation all help prevent black edge corrosion.
Older rural homes often have uneven walls of stone or lime plaster, which can distort a bonded mirror unless the wall is levelled or a backing board is used. Damp solid walls also need checking before a mirror is fixed to them.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Polished mirror, 1200 × 900 mm | £205 – £265 |
| Safety-backed mirror, 1800 × 1000 mm | £365 – £465 |
| Gym mirror wall, 4000 × 2000 mm | £995 – £1,295 |
Choosing your bespoke mirrors
Heated demister pad
A thin heating pad bonded behind a bathroom mirror to keep an area clear of steam, wired in by a qualified electrician.
Safety-backed mirror
Mirror with a bonded backing film that holds fragments together if it breaks, recommended for doors, full-height mirrors, gyms and children's rooms.
Clear silver mirror
Standard silver-coated float glass mirror, cut to size, suited to most rooms, wardrobes and wall mirrors where a true, neutral reflection is wanted.
Low-iron mirror
Mirror made on low-iron glass, which reduces the slight green cast of standard glass for a brighter, more colour-accurate reflection.
Bespoke Mirrors in Scottish Borders: questions
What affects the cost of a bespoke mirror?
The main cost drivers are the size and thickness of the mirror, the number of panels, the edge finish, any tint or low-iron glass, safety backing, cut-outs and the fixing method. Very large single sheets, access through narrow stairs and full mirror walls also affect the price. See the guide prices for typical ranges.
What edge finishes can I choose for a bespoke mirror?
The main choices are a flat polished edge, a bevelled edge and an arrised edge. Polished edges give a clean, frameless look and suit mirror walls, bevels add an angled border that catches the light, and arrised edges simply take off the sharpness where a frame or channel will hide them. Bevel width can usually be chosen too.
Can a mirror be cut around sockets and light switches?
Yes. We mark socket and switch positions on the template, cut the openings in the mirror, then remove and refit the faceplates so the mirror sits neatly behind them with the power isolated. If sockets need moving or adding, a qualified electrician should do that before we template so the cut-outs line up.
Can a large mirror be fixed to plasterboard?
Often, yes, but it depends on the board, its fixings and the surface finish. Adhesive grips the paint or plaster layer, so flaky paint or weak skim can let go under the weight. We check the wall at survey and may add a base channel, mechanical fixings into studs, or a backing board to spread the load.
Which parts of Scottish Borders do you cover for bespoke mirrors?
We cover the whole of Scottish Borders, including Hawick, Galashiels, Peebles, Kelso and Selkirk, and postcode areas EH, TD. Building rules for bespoke mirrors here follow the regulations for Scotland. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Scottish Borders
- Replacement Glass in Scottish Borders
- Misted Glass Repair in Scottish Borders
- Emergency Glazing in Scottish Borders
- Safety Glass in Scottish Borders
- Window Repairs in Scottish Borders
- Window Film in Scottish Borders
- uPVC Windows in Scottish Borders
- Aluminium Windows in Scottish Borders
- Sash Windows in Scottish Borders
- Composite Doors in Scottish Borders
- Bifold Doors in Scottish Borders
- Sliding Doors in Scottish Borders
- Secondary Glazing in Scottish Borders
- Roof Lanterns in Scottish Borders
- Glass Balustrades in Scottish Borders
- Frameless Glass in Scottish Borders
- Shower Screens in Scottish Borders
- Glass Splashbacks in Scottish Borders
- Glass Roofs in Scottish Borders
- Shopfront Glazing in Scottish Borders
- Curtain Walling in Scottish Borders
- Glass Partitions in Scottish Borders
- Property Glazing in Scottish Borders
All glazing in Scottish Borders · Bespoke Mirrors across the UK
Get a written quote in Scottish Borders
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.