Amersham · Buckinghamshire
Composite Doors in Amersham
A new composite front door in Amersham can stop draughts, upgrade your locks and refresh the front of your home, with every door made to the measured opening.
- HP6
- HP7
- Guide from £1,295
Composite front doors for homes and businesses in Amersham
Replacing a front door usually takes a day on site. The old door and frame are cut out, the new frame is fixed, packed and squared, the slab is hung and adjusted, and the frame is sealed outside and trimmed inside. Plaster around older frames sometimes needs making good afterwards.
Composite doors do not need painting. Wipe the skin and frame with warm soapy water, avoid solvents and abrasive pads, and keep the threshold drainage clear. A little light oil on the lock gearing and hinges once or twice a year keeps the door closing smoothly, and hinges can be adjusted if it drops.
A composite door slab usually combines a glass-reinforced plastic (GRP) outer skin, moulded with a woodgrain texture, over an insulated core. Some cores are high-density foam, others solid timber. Timber-cored slabs tend to feel heavier and more solid when closed, while foam cores are lighter and insulate well.
Glass in a door, and in any side panel within 300mm of the door's edge, counts as a critical location when it is within 1500mm of the floor. In England, Approved Document K expects that glass to be safety glass that breaks safely, such as toughened or laminated glass.
Included as standard
- Survey, measuring and threshold check
- Made-to-measure composite doorset in your chosen colour
- Fitting, adjusting, sealing and finishing around the frame
- Written guarantee terms and advice on building regulations sign-off
Local details for Amersham
- Postcodes covered
- HP6, HP7 and the surrounding area, including Chesham, Chalfont St Peter and Gerrards Cross
- Coast
- Amersham is well inland, around 72 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Amersham the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Dark-coloured doors in direct sun get much hotter than pale ones, so follow the manufacturer's guidance on colour for south and west-facing entrances. Glazed panels and side lights bring daylight into dark hallways, especially on north-facing elevations.
- Access and setting
- Rural doors often face open fields, driving rain and sometimes mud and animals, so robust weather seals and threshold drainage matter. Older cottages may have low or irregular openings, so doors are measured carefully and frames sized to suit.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Amersham
| Typical job | Guide price inc VAT |
|---|---|
| Composite front door, supplied and fitted | £1,295 – £1,795 |
| Door with one side panel | £1,695 – £2,295 |
| Door, side panel and top light | £1,895 – £2,595 |
Get a guide price for your size
Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
What you can choose
Glass designs
Clear, obscure, bevelled or decorative glass in sealed cassettes, with toughened or laminated panes for safety and security.
Low threshold
A low-profile aluminium threshold for step-free or near step-free access, used where drainage and shelter allow.
Side panels and toplights
Glazed or solid panels beside or above the door to bring light into the hallway and fill wider openings.
Composite Doors in Amersham: questions
Will a composite door fade or need painting?
Composite doors do not need painting, and the coloured skins are designed to resist fading, although any surface colour can change slightly over many years in strong sun. Clean the door with warm soapy water and a soft cloth, and avoid solvents or abrasive pads. Manufacturer guarantees apply to the finish, and the terms are confirmed in writing.
Do I need planning permission to replace my front door?
In England, replacing a house's front door with one of similar appearance usually does not need planning permission. Listed buildings need listed building consent for significant works, and conservation areas or Article 4 directions can restrict changes to front doors, colours and materials. Flats may need permission, so check with your council if your home falls into any of these.
What guarantee comes with a composite door?
Manufacturer guarantees apply to the door slab, frame, glass and locking hardware, and the terms are confirmed in writing. Guarantee terms for the installation are set out in writing with your quote, so you know what is covered before you go ahead. Keep the paperwork with your building regulations certificate for when you sell the property.
Can I change a flat's front door to a composite door?
It depends where the door is. A flat entrance door that opens onto a shared stairwell or corridor is normally a fire door, so only a certified fire-rated doorset is suitable. Leaseholders usually need the freeholder's or managing agent's agreement too. A flat door opening directly outside may be treated like a house door, so check first.
Do you cover Amersham for composite doors?
Yes. We can quote for composite doors across Amersham and the surrounding Buckinghamshire area, including postcode districts HP6 and HP7, and nearby Chesham, Chalfont St Peter and Gerrards Cross. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Amersham
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.