Ilford · Greater London
Composite Doors in Ilford
Our glaziers fit composite front and back doors across Ilford, removing the old frame, levelling the new doorset and explaining how the work is approved.
- E18
- IG1
- IG2
- IG3
- IG4
- IG5
- Guide from £1,295
Composite front doors in Ilford: what to know
Glass in a door, and in any side panel within 300mm of the door's edge, counts as a critical location when it is within 1500mm of the floor. In England, Approved Document K expects that glass to be safety glass that breaks safely, such as toughened or laminated glass.
Letterplates can be a security weak spot, because tools can be fed through to reach the inside handle or keys. A letterplate with an internal cowl or restrictor, or a door with no letterplate and a wall-mounted post box, reduces that risk. Keys should be kept away from the door.
In England, replacing a glazed external door is notifiable building work, and whether a mostly solid door counts depends on how much of it is glazed, so the installer confirms what applies. Where notification is needed, an installer registered with a competent person scheme can self-certify the work; otherwise building control approves it.
For easily accessible doors in new homes in England, Approved Document Q expects doorsets that resist forced entry, commonly shown by testing to PAS 24. Asking for a PAS 24 tested composite door is a practical benchmark when replacing a front or back door, even though the rule targets new dwellings.
Included as standard
- Fitting, adjusting, sealing and finishing around the frame
- Written guarantee terms and advice on building regulations sign-off
- Made-to-measure composite doorset in your chosen colour
- Removal and disposal of the old door and frame
Working in Ilford
- Postcodes covered
- E18, IG1, IG2, IG3, IG4, IG5, IG6, IG8 and the surrounding area, including Barking, Becontree and Leytonstone
- Coast
- Ilford is well inland, around 24 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Ilford the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Dark-coloured doors in direct sun get much hotter than pale ones, so follow the manufacturer's guidance on colour for south and west-facing entrances. Glazed panels and side lights bring daylight into dark hallways, especially on north-facing elevations.
- Access and setting
- Street-facing front doors in towns and cities face more passers-by, so anti-snap cylinders, laminated glass and letterplate guards are worth specifying. Conservation areas may control front door styles and colours, and flat entrance doors onto shared corridors normally need fire-rated doorsets.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Ilford
| Typical job | Guide price inc VAT |
|---|---|
| Composite front door, supplied and fitted | £1,295 – £1,795 |
| Door with one side panel | £1,695 – £2,295 |
| Door, side panel and top light | £1,895 – £2,595 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Specification choices
Insulated foam core
A lighter slab with a high-density foam core, offering good thermal performance and a wide range of styles.
Glass designs
Clear, obscure, bevelled or decorative glass in sealed cassettes, with toughened or laminated panes for safety and security.
Solid timber core
A heavier slab with a timber core under the composite skin, giving a solid feel and sound when the door closes.
Composite Doors in Ilford: questions
Will a composite door fade or need painting?
Composite doors do not need painting, and the coloured skins are designed to resist fading, although any surface colour can change slightly over many years in strong sun. Clean the door with warm soapy water and a soft cloth, and avoid solvents or abrasive pads. Manufacturer guarantees apply to the finish, and the terms are confirmed in writing.
Can I change a flat's front door to a composite door?
It depends where the door is. A flat entrance door that opens onto a shared stairwell or corridor is normally a fire door, so only a certified fire-rated doorset is suitable. Leaseholders usually need the freeholder's or managing agent's agreement too. A flat door opening directly outside may be treated like a house door, so check first.
Are composite doors more secure than uPVC doors?
A well-specified composite door is usually stiffer and harder to force than an older uPVC panel door, but security depends mostly on the lock, cylinder, hinges and glass. Look for a multi-point lock, an anti-snap cylinder such as TS 007 3-star or SS312 Diamond, laminated glass and a door tested to PAS 24.
Do I need planning permission to replace my front door?
In England, replacing a house's front door with one of similar appearance usually does not need planning permission. Listed buildings need listed building consent for significant works, and conservation areas or Article 4 directions can restrict changes to front doors, colours and materials. Flats may need permission, so check with your council if your home falls into any of these.
Do you cover Ilford for composite doors?
Yes. We can quote for composite doors across Ilford and the surrounding Greater London area, including postcode districts E18, IG1, IG2, IG3 and IG4, and nearby Barking, Becontree and Leytonstone. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Ilford
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.