Call 0800 088 6248

Kingston upon Thames · Greater London

Curtain Walling in Kingston upon Thames

Planning a glazed facade in Kingston upon Thames? Our glaziers can survey the building and quote for stick or unitised curtain walling specified for its height, exposure and energy needs.

  • KT1
  • KT2
  • KT3
  • KT5
  • KT6
  • KT9
  • Guide from £455 per m²

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Curtain walling for homes and businesses in Kingston upon Thames

BS EN 13830 is the product standard for curtain walling. It treats the system as a kit, including its fixings, set from vertical up to 15 degrees off vertical. Sloping roof glazing and patent glazing fall outside it and are covered by other standards.

A unitised system arrives as storey-height panels assembled and glazed in a factory, which are lifted into place and interlocked. Fewer joints are made on site, which can reduce the risk of air and water leaks from site workmanship, but cranage and lead times need careful planning.

Under the energy rules for new work in England, curtain walling performance is assessed for the whole system, including frames and opaque infill panels, not just the glass. Solar gain through the glass is also considered, so the glass choice balances heat loss, overheating and daylight.

The Centre for Window and Cladding Technology publishes the Standard for systemised building envelopes, the recognised UK industry standard for specifying, testing and assessing curtain walling. It draws in BS EN 13830 and the relevant building regulations, and is often referenced in commercial specifications.

What's included

  • Fabrication drawings and coordination with other trades
  • System selection and glass specification for the building
  • Supply and installation of framing, glass and panels
  • Survey of openings, supporting structure and access
Glass curtain wall on an office building against a blue sky

Local details for Kingston upon Thames

Postcodes covered
KT1, KT2, KT3, KT5, KT6, KT9 and the surrounding area, including Surbiton, New Malden and Twickenham
Coast
Kingston upon Thames is well inland, around 46 km from the nearest coast, so salt exposure is not usually a factor.
Daylight and sun
In Kingston upon Thames the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Large glazed facades bring in plenty of daylight but also solar gain and glare, especially on south and west elevations. Solar control glass, shading and blinds are balanced against light transmission so interiors stay bright without overheating.
Access and setting
Commercial buildings on open rural or upland sites can face high wind exposure and driving rain, which affect frame sizes, glass thickness and sealing details. Longer delivery routes for large glass units also need planning in advance.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Kingston upon Thames

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Curtain walling, per m² (stick system)£455 – £795
Curtain walling, per m² (unitised)£545 – £955

Get a guide price for your size

Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.

Choosing your curtain walling

Integrated opening vents

Top-hung or parallel-opening vents built into the curtain wall grid to provide natural ventilation without breaking the facade line.

Unitised curtain wall

Factory-assembled, pre-glazed storey-height panels lifted into place, reducing site joints and work at height on taller or tight sites.

Stick curtain wall

Mullions and transoms assembled on site with glass and panels fitted afterwards, suited to low-rise buildings, entrances and ground-floor screens.

Curtain Walling in Kingston upon Thames: questions

How does curtain walling keep water out?

Curtain walling uses outer gaskets and seals to shed most rain, with drainage routes inside the framing that collect any water getting past them and lead it back outside. Inner seals then provide the air seal. Keeping drainage outlets clear and gaskets in good condition is essential, because blocked drains or shrunk seals can let water into the building.

Do glazed screens in offices and entrances need markings?

Large areas of clear glass that people could walk into need to be made visible. In England, the guidance for buildings other than dwellings puts manifestation at 850–1000mm and 1400–1600mm above the floor, and workplace rules across Great Britain require glass to be marked where needed for safety. Frosted bands or logos can meet this.

How long does a curtain walling project take?

Timescales depend on size and complexity. Design, approvals and fabrication of framing and glass usually take several weeks to a few months before installation starts. Installation then depends on the facade area, access and sequencing with other trades. Replacing individual units is much quicker once the glass is made. Your written quote sets out the expected programme.

Should I choose a stick or unitised curtain wall?

A stick system is assembled on site and generally suits low-rise buildings, entrances and smaller screens, with simpler logistics. A unitised system uses factory-made panels lifted into place, which reduces site joints and work at height but needs cranage and longer planning. The building's height, access and programme usually decide which is the right fit.

Do you cover Kingston upon Thames for curtain walling?

Yes. We can quote for curtain walling across Kingston upon Thames and the surrounding Greater London area, including postcode districts KT1, KT2, KT3, KT5 and KT6, and nearby Surbiton, New Malden and Twickenham. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Kingston upon Thames

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote