Call 0800 088 6248

Inverness · Highlands & Islands

Curtain Walling in Inverness

Need a glazed entrance screen for an office or showroom in Inverness? We can quote for framed screens with doors, manifestation and the glass specification to suit.

  • IV1
  • IV3
  • Guide from £455 per m²

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Aluminium curtain wall for homes and businesses in Inverness

The price depends on the facade area, the system type, glass specification such as solar control or triple glazing, infill panels, opening vents, building height and access equipment, and design and testing requirements. Replacement units also depend on how the glass is retained. See the guide prices for typical ranges.

Curtain walling needs planned upkeep. Clean frames and glass regularly, keep drainage outlets clear, and inspect gaskets, seals and fixings for shrinkage, gaps or corrosion. Failed or misted sealed units can usually be replaced individually without removing the surrounding framing.

Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panes in the factory, and it is often specified for toughened glass high on facades where a breakage is harder to deal with.

A unitised system arrives as storey-height panels assembled and glazed in a factory, which are lifted into place and interlocked. Fewer joints are made on site, which can reduce the risk of air and water leaks from site workmanship, but cranage and lead times need careful planning.

What's included

  • Supply and installation of framing, glass and panels
  • Fabrication drawings and coordination with other trades
  • Survey of openings, supporting structure and access
  • Sealing, weathering and drainage details at all interfaces
Glass curtain wall on an office building against a blue sky

About Inverness for this job

Postcodes covered
IV1, IV3 and the surrounding area, including Nairn, Forres and Elgin
Coast
Inverness is about 2 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Facades near the sea face salt-laden wind and driving rain, which attack frame finishes and stress seals. Suitable coating specifications, regular washing, gasket checks and higher design wind loads for exposed sites all matter for curtain walling there.
Daylight and sun
In Inverness the midwinter sun reaches about 9° above the horizon at noon, with roughly 6.3 hours of daylight, rising to about 56° and 17.7 hours in midsummer. Large glazed facades bring in plenty of daylight but also solar gain and glare, especially on south and west elevations. Solar control glass, shading and blinds are balanced against light transmission so interiors stay bright without overheating.
Access and setting
Commercial buildings on open rural or upland sites can face high wind exposure and driving rain, which affect frame sizes, glass thickness and sealing details. Longer delivery routes for large glass units also need planning in advance.
Rules in Scotland
Section 4 (Safety) of the Scottish Technical Handbooks covers glazing that people could collide with, such as glass in and beside doors and low-level glazing, where safety glass is needed.

Guide prices in Inverness

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Curtain walling, per m² (stick system)£455 – £795
Curtain walling, per m² (unitised)£545 – £955

Get a guide price for your size

Section 6 (Energy) of the Scottish Technical Handbooks sets the thermal performance that replacement windows, doors and rooflights should achieve.

Choosing your curtain walling

Solar control glass

Coated glass that limits solar heat gain on sunny elevations while keeping good daylight, reducing overheating and glare inside.

Opaque spandrel panels

Insulated or back-painted glass panels that hide floor slabs, ceiling voids and services while keeping the facade's appearance consistent.

Unitised curtain wall

Factory-assembled, pre-glazed storey-height panels lifted into place, reducing site joints and work at height on taller or tight sites.

Curtain Walling in Inverness: questions

What glass is used in curtain walling?

Curtain walling normally uses sealed double or triple glazed units, with toughened or laminated panes chosen for safety, security and wind load. Coatings control heat loss and solar gain, and heat-soaked toughened glass is often specified for upper levels. Where fire resistance is needed, a tested fire-resistant glazing system is used instead of standard glass.

Should I choose a stick or unitised curtain wall?

A stick system is assembled on site and generally suits low-rise buildings, entrances and smaller screens, with simpler logistics. A unitised system uses factory-made panels lifted into place, which reduces site joints and work at height but needs cranage and longer planning. The building's height, access and programme usually decide which is the right fit.

How should curtain walling be maintained?

Curtain walling should be cleaned regularly and inspected at planned intervals. Check that drainage outlets are clear, gaskets have not shrunk or slipped, sealant joints are intact and fixings show no corrosion. Address misted or cracked units early. A simple maintenance schedule kept with the building records helps facilities teams spot problems before they become leaks.

What affects the cost of curtain walling?

The main cost drivers are facade area, system type, glass specification, infill panels, opening vents, building height and access equipment such as scaffolding, hoists or cranes. Structural silicone glazing, unitised panels, fire-resisting sections and testing requirements add cost. See the guide prices for typical ranges, and your written quote fixes the price for the specification.

Do you cover Inverness for curtain walling?

Yes. We can quote for curtain walling across Inverness and the surrounding Highlands & Islands area, including postcode districts IV1 and IV3, and nearby Nairn, Forres and Elgin. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Inverness

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote