Nottinghamshire · England

Curtain Walling in Nottinghamshire

Misted, cracked or leaking facade units in Nottinghamshire can usually be replaced individually, and we can survey the system and access before quoting.

Guide from £455 per m²
10 towns covered
Postcode areas DN, NG, S

Curtain walling for homes and businesses in Nottinghamshire

Wind load on a facade rises with height, exposure and building shape, and it decides the mullion size, bracket design and glass thickness. Calculations for the specific site are part of the design, so a system suited to a sheltered ground-floor screen may not suit an exposed upper storey.

BS EN 13830 is the product standard for curtain walling. It treats the system as a kit, including its fixings, set from vertical up to 15 degrees off vertical. Sloping roof glazing and patent glazing fall outside it and are covered by other standards.

The price depends on the facade area, the system type, glass specification such as solar control or triple glazing, infill panels, opening vents, building height and access equipment, and design and testing requirements. Replacement units also depend on how the glass is retained. See the guide prices for typical ranges.

A stick system is built on site piece by piece. Aluminium mullions and transoms are fixed to the structure first, then the glass and infill panels go in, and finally the pressure plates and caps. It suits low-rise buildings and screens but needs access to both faces.

Glass curtain wall on an office building against a blue sky

Towns we cover for curtain walling in Nottinghamshire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Nottinghamshire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

If the glass sits in a fire-resisting door or screen, such as a flat entrance door or a commercial corridor screen, it must be replaced with fire-rated glazing tested as part of that system. Ordinary toughened glass is not a substitute.

Nottinghamshire is inland, around 46 km from the nearest coast at its closest point, so salt exposure is rarely a factor.

City-centre facades often need crane or hoist bookings, pavement or road licences, out-of-hours deliveries and close coordination with other trades. Tight sites need careful sequencing, and unitised panels can reduce the amount of work at height.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical job	Guide price inc VAT
Curtain walling, per m² (stick system)	£455 – £795
Curtain walling, per m² (unitised)	£545 – £955

Choosing your curtain walling

Solar control glass

Coated glass that limits solar heat gain on sunny elevations while keeping good daylight, reducing overheating and glare inside.

Unitised curtain wall

Factory-assembled, pre-glazed storey-height panels lifted into place, reducing site joints and work at height on taller or tight sites.

Stick curtain wall

Mullions and transoms assembled on site with glass and panels fitted afterwards, suited to low-rise buildings, entrances and ground-floor screens.

Capped system

Glass clamped by pressure plates behind a visible external cap, available in different profiles and colours to emphasise the grid.

Curtain Walling in Nottinghamshire: questions

What is the difference between curtain walling and windows?

Curtain walling is a continuous framed wall of glass and panels that spans across floors and hangs off the building structure, carrying its own weight and wind loads. Windows sit within individual openings in a masonry or framed wall. Curtain walling suits large glazed areas and multi-storey facades, while windows suit punched openings.

Do glazed screens in offices and entrances need markings?

Large areas of clear glass that people could walk into need to be made visible. In England, the guidance for buildings other than dwellings puts manifestation at 850–1000mm and 1400–1600mm above the floor, and workplace rules across Great Britain require glass to be marked where needed for safety. Frosted bands or logos can meet this.

How long does a curtain walling project take?

Timescales depend on size and complexity. Design, approvals and fabrication of framing and glass usually take several weeks to a few months before installation starts. Installation then depends on the facade area, access and sequencing with other trades. Replacing individual units is much quicker once the glass is made. Your written quote sets out the expected programme.

Should I choose a stick or unitised curtain wall?

A stick system is assembled on site and generally suits low-rise buildings, entrances and smaller screens, with simpler logistics. A unitised system uses factory-made panels lifted into place, which reduces site joints and work at height but needs cranage and longer planning. The building's height, access and programme usually decide which is the right fit.

Which parts of Nottinghamshire do you cover for curtain walling?

We cover the whole of Nottinghamshire, including Nottingham, Mansfield, Worksop, Newark-on-Trent and Arnold, and postcode areas DN, NG, S. Building rules for curtain walling here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Other glazing services in Nottinghamshire

All glazing in Nottinghamshire · Curtain Walling & Glazed Screens across the UK

Get a written quote in Nottinghamshire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

Get a guide price 0800 088 6248 WhatsApp