Bedford · Bedfordshire
Frameless Glass in Bedford
Need a clear glass entrance for a shop or office in Bedford? We can quote for frameless doors with floor springs, locks and the markings that busy entrances need.
- MK40
- MK41
- Guide from £795
Frameless glass screens for homes and businesses in Bedford
In buildings other than dwellings in England, large areas of clear glass that people could walk into need manifestation at two levels, 850–1000mm and 1400–1600mm above the floor. A frameless door with a large handle or push plate on each pane is one example the guidance accepts without markings.
The guidance in England asks for glass meeting Class 3 of BS EN 12600 in most critical locations, and the higher Class 2 where a door or door side panel is more than 900mm wide. Toughened glass for doors is made to suit, and Wales, Scotland and Northern Ireland have their own guidance.
For buildings other than dwellings in England, access guidance says a manual door should open with no more than 30N of force at its edge from closed to 30 degrees, and 22.5N from 30 to 60 degrees. Heavy glass doors and closers are set up with that limit in mind.
Frameless doors run with small gaps at the edges and under the door, so they do not seal against sound or draughts the way a framed, gasketed door does. Clear seal strips can reduce the gaps, but where privacy or noise matters, an acoustic framed system may suit better.
What's included
- Survey of the opening, floor and fixing points
- Holes and cut-outs made at the factory before toughening
- Templating for made-to-measure toughened glass
- Hinges, patch fittings, floor spring or sliding gear
About Bedford for this job
- Postcodes covered
- MK40, MK41 and the surrounding area, including Kempston, Ampthill and St Neots
- Coast
- Bedford is well inland, around 90 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Bedford the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.5 hours of daylight, rising to about 61° and 16.5 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Large glass panels for city shops, offices and flats can need a planned delivery, a team to carry them, and sometimes a lift or crane booking. Access through communal areas, loading limits and permitted working hours all affect the fitting day.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Bedford
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Choosing your frameless glass
Satin or patterned glass
Acid-etched, sandblasted-effect or patterned glass that gives privacy while still passing light, available as full panels or as bands.
Glass-to-wall hinged door
Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.
Hardware finishes
Patch fittings, handles and hinges in satin or polished stainless steel, black or other finishes to match the room or shopfront.
Frameless Glass in Bedford: questions
How long does it take to get a frameless glass door fitted?
Once the opening is templated, the glass is made to order and toughened, which usually takes a few weeks. Fitting a single door or screen is normally done in a day, while larger entrances or runs of screens take longer. Your written quote sets out the expected programme, and we confirm the date when the glass is ready.
Can a frameless glass door be fitted into my existing doorway?
Usually, yes. We survey the opening to check the head and walls can take the fixings, and template it so the glass follows any out-of-square edges. A floor spring needs a recess in the floor, so where that is not practical we may suggest a top pivot, wall hinges or sliding gear instead. Some making good of plaster may be needed.
What happens if a frameless glass door breaks?
Toughened glass breaks into small, blunt pieces rather than large shards, so the door will need to be fully replaced rather than repaired. We can make the opening safe and secure in the meantime, then remake the panel from the original measurements or a fresh template, with holes and cut-outs formed before toughening.
Do glass doors and screens need markings on them?
In buildings other than dwellings in England, large clear glass that people could walk into needs manifestation at two heights, 850–1000mm and 1400–1600mm from the floor. Workplace rules across Great Britain also require glass to be made apparent where needed. Homes are not covered by the manifestation guidance, though a frosted band can still be sensible.
Do you cover Bedford for frameless glass?
Yes. We can quote for frameless glass across Bedford and the surrounding Bedfordshire area, including postcode districts MK40 and MK41, and nearby Kempston, Ampthill and St Neots. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Bedford
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.