Call 0800 088 6248

Exeter · Devon

Frameless Glass in Exeter

A dark hallway in Exeter can borrow light from the next room through a frameless glass screen, keeping the spaces separate while daylight passes straight through.

  • EX1
  • EX2
  • EX3
  • EX4
  • Guide from £795

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Frameless glass screens for homes and businesses in Exeter

Toughened glass cannot be cut, drilled or notched once it has been toughened. Holes for patch fittings, cut-outs for locks and handles, and any shaped corners are all made before toughening, which is why we template the opening first and the glass is made to order rather than cut on site.

A floor spring sits in a steel box set into the floor below the door, controlling closing speed and hold-open. It needs a recess cut into the screed, so it is far simpler to plan before tiles, stone or timber flooring are laid than to retrofit later.

Frameless doors run with small gaps at the edges and under the door, so they do not seal against sound or draughts the way a framed, gasketed door does. Clear seal strips can reduce the gaps, but where privacy or noise matters, an acoustic framed system may suit better.

The guidance in England asks for glass meeting Class 3 of BS EN 12600 in most critical locations, and the higher Class 2 where a door or door side panel is more than 900mm wide. Toughened glass for doors is made to suit, and Wales, Scotland and Northern Ireland have their own guidance.

What you get

  • Manifestation where needed, final clean and care advice
  • Hinges, patch fittings, floor spring or sliding gear
  • Holes and cut-outs made at the factory before toughening
  • Templating for made-to-measure toughened glass
Frameless glass doors and screens at an office reception

About Exeter for this job

Postcodes covered
EX1, EX2, EX3, EX4 and the surrounding area, including Exmouth, Tiverton and Newton Abbot
Coast
Exeter is about 6 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. External frameless entrances near the sea face salt spray on patch fittings, pivots and floor spring covers, which can mark or pit finishes over time. Hardware suited to exposed sites, and rinsing fittings during routine cleaning, help them stay smooth and presentable.
Daylight and sun
In Exeter the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 63° and 16.3 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
Access and setting
Large glass panels for city shops, offices and flats can need a planned delivery, a team to carry them, and sometimes a lift or crane booking. Access through communal areas, loading limits and permitted working hours all affect the fitting day.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Exeter

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Frameless glass door with fittings£1,295 – £1,895
Door with fixed side screen£2,195 – £3,195
Fixed frameless screen, about 2 m²£795 – £1,095

Get a guide price for your size

For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).

Options to choose between

Pivot door with patches

Corner patch fittings with a floor spring or pivot, the usual choice for shop and office entrances and wide internal doors that need controlled closing.

Low-iron glass

Glass with less iron, removing the green tint seen on the edges of standard glass, so thick panels look clearer and colours stay true.

Satin or patterned glass

Acid-etched, sandblasted-effect or patterned glass that gives privacy while still passing light, available as full panels or as bands.

Frameless Glass in Exeter: questions

Do frameless glass doors have to be safety glass?

Yes. Glass in doors is a critical location, so in England it must meet the impact requirements in Approved Document K, and frameless doors are made from toughened safety glass to suit. Toughened glass also lets the door carry its own hinges and handles. Other UK nations have equivalent guidance, and we specify the glass to suit where you are.

Will a frameless glass door block noise and draughts?

Only partly. Frameless doors run with small gaps at the sides and bottom so the glass can swing freely, which lets some sound and air through. Clear seal strips can narrow the gaps. If you need a quiet meeting room or a draught-free external entrance, a framed or acoustic glazed system will perform better, and we can quote for both.

Can a frameless glass door be fitted into my existing doorway?

Usually, yes. We survey the opening to check the head and walls can take the fixings, and template it so the glass follows any out-of-square edges. A floor spring needs a recess in the floor, so where that is not practical we may suggest a top pivot, wall hinges or sliding gear instead. Some making good of plaster may be needed.

What happens if a frameless glass door breaks?

Toughened glass breaks into small, blunt pieces rather than large shards, so the door will need to be fully replaced rather than repaired. We can make the opening safe and secure in the meantime, then remake the panel from the original measurements or a fresh template, with holes and cut-outs formed before toughening.

Do you cover Exeter for frameless glass?

Yes. We can quote for frameless glass across Exeter and the surrounding Devon area, including postcode districts EX1, EX2, EX3 and EX4, and nearby Exmouth, Tiverton and Newton Abbot. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Exeter

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote