Call 0800 088 6248

Ferndown · Dorset

Frameless Glass in Ferndown

Is your glass entrance door in Ferndown dropping, dragging or slamming shut? We can check the floor spring and fittings, adjust them, or quote for a replacement door.

  • BH22
  • Guide from £795

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Glass entrance doors for homes and businesses in Ferndown

Toughened glass cannot be cut, drilled or notched once it has been toughened. Holes for patch fittings, cut-outs for locks and handles, and any shaped corners are all made before toughening, which is why we template the opening first and the glass is made to order rather than cut on site.

In buildings other than dwellings in England, large areas of clear glass that people could walk into need manifestation at two levels, 850–1000mm and 1400–1600mm above the floor. A frameless door with a large handle or push plate on each pane is one example the guidance accepts without markings.

In workplaces in England, Wales and Scotland, the Workplace (Health, Safety and Welfare) Regulations 1992 require glass in doors, walls and partitions to be of safety material or protected where needed for safety, and to be marked or otherwise made apparent so people notice it.

The guidance in England asks for glass meeting Class 3 of BS EN 12600 in most critical locations, and the higher Class 2 where a door or door side panel is more than 900mm wide. Toughened glass for doors is made to suit, and Wales, Scotland and Northern Ireland have their own guidance.

What a typical job includes

  • Holes and cut-outs made at the factory before toughening
  • Fitting, alignment and adjustment of closing speed
  • Hinges, patch fittings, floor spring or sliding gear
  • Survey of the opening, floor and fixing points
Frameless glass doors and screens at an office reception

Working in Ferndown

Postcodes covered
BH22 and the surrounding area, including Bournemouth, Christchurch and Poole
Coast
Ferndown sits roughly 9 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. External frameless entrances near the sea face salt spray on patch fittings, pivots and floor spring covers, which can mark or pit finishes over time. Hardware suited to exposed sites, and rinsing fittings during routine cleaning, help them stay smooth and presentable.
Daylight and sun
In Ferndown the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 63° and 16.3 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
Access and setting
Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Ferndown

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Frameless glass door with fittings£1,295 – £1,895
Door with fixed side screen£2,195 – £3,195
Fixed frameless screen, about 2 m²£795 – £1,095

Get a guide price for your size

For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).

Specification choices

Glass-to-wall hinged door

Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.

Hardware finishes

Patch fittings, handles and hinges in satin or polished stainless steel, black or other finishes to match the room or shopfront.

Low-iron glass

Glass with less iron, removing the green tint seen on the edges of standard glass, so thick panels look clearer and colours stay true.

Frameless Glass in Ferndown: questions

Will a frameless glass door block noise and draughts?

Only partly. Frameless doors run with small gaps at the sides and bottom so the glass can swing freely, which lets some sound and air through. Clear seal strips can narrow the gaps. If you need a quiet meeting room or a draught-free external entrance, a framed or acoustic glazed system will perform better, and we can quote for both.

What thickness of glass is used for frameless glass doors?

Frameless doors usually use 10mm or 12mm toughened safety glass. The thicker glass is generally used for taller or wider doors and for busy commercial entrances, while 10mm often suits internal doors in homes. The hardware maker's limits for panel weight and size also guide the choice, and we confirm the thickness in your written quote.

Do glass doors and screens need markings on them?

In buildings other than dwellings in England, large clear glass that people could walk into needs manifestation at two heights, 850–1000mm and 1400–1600mm from the floor. Workplace rules across Great Britain also require glass to be made apparent where needed. Homes are not covered by the manifestation guidance, though a frosted band can still be sensible.

Do frameless glass doors have to be safety glass?

Yes. Glass in doors is a critical location, so in England it must meet the impact requirements in Approved Document K, and frameless doors are made from toughened safety glass to suit. Toughened glass also lets the door carry its own hinges and handles. Other UK nations have equivalent guidance, and we specify the glass to suit where you are.

Do you cover Ferndown for frameless glass?

Yes. We can quote for frameless glass across Ferndown and the surrounding Dorset area, including postcode districts BH22, and nearby Bournemouth, Christchurch and Poole. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Ferndown

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote