Bexleyheath · Greater London
Frameless Glass in Bexleyheath
Is your glass entrance door in Bexleyheath dropping, dragging or slamming shut? We can check the floor spring and fittings, adjust them, or quote for a replacement door.
- DA5
- DA6
- DA14
- DA15
- DA16
- Guide from £795
Glass internal doors in Bexleyheath
Toughened glass cannot be cut, drilled or notched once it has been toughened. Holes for patch fittings, cut-outs for locks and handles, and any shaped corners are all made before toughening, which is why we template the opening first and the glass is made to order rather than cut on site.
Frameless glass doors are usually made from 10mm or 12mm toughened safety glass, with the thickness chosen to suit the door height and its hardware. With no frame, the glass itself carries the hinges, handles and locks, so every fitting is specified together with the glass.
In workplaces in England, Wales and Scotland, the Workplace (Health, Safety and Welfare) Regulations 1992 require glass in doors, walls and partitions to be of safety material or protected where needed for safety, and to be marked or otherwise made apparent so people notice it.
A frameless door hangs on one of three main hardware types. Patch fittings clamp to the corners and pivot on a floor spring or top pivot, glass-to-wall hinges suit lighter internal doors, and sliding gear runs the panel along a track fixed above the opening.
What a typical job includes
- Holes and cut-outs made at the factory before toughening
- Manifestation where needed, final clean and care advice
- Fitting, alignment and adjustment of closing speed
- Templating for made-to-measure toughened glass
Working in Bexleyheath
- Postcodes covered
- DA5, DA6, DA14, DA15, DA16 and the surrounding area, including Welling, Dartford and Swanley
- Coast
- Bexleyheath sits roughly 15 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. External frameless entrances near the sea face salt spray on patch fittings, pivots and floor spring covers, which can mark or pit finishes over time. Hardware suited to exposed sites, and rinsing fittings during routine cleaning, help them stay smooth and presentable.
- Daylight and sun
- In Bexleyheath the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Large glass panels for city shops, offices and flats can need a planned delivery, a team to carry them, and sometimes a lift or crane booking. Access through communal areas, loading limits and permitted working hours all affect the fitting day.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Bexleyheath
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
What you can choose
Low-iron glass
Glass with less iron, removing the green tint seen on the edges of standard glass, so thick panels look clearer and colours stay true.
Glass-to-wall hinged door
Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.
Satin or patterned glass
Acid-etched, sandblasted-effect or patterned glass that gives privacy while still passing light, available as full panels or as bands.
Frameless Glass in Bexleyheath: questions
Can a frameless glass door be locked?
Yes. A patch lock at the bottom of the door shoots a bolt into a keep in the floor, and a centre lock can join a pair of doors. A glass door does not offer the same resistance as a solid door, so for external entrances you may also want shutters, an alarm or laminated security glass in adjoining screens.
How do I look after a frameless glass door?
Clean the glass with a soft cloth and a non-abrasive glass cleaner, and wipe metal fittings with a damp cloth rather than harsh chemicals. Do not hang anything from the door or let it slam against a stop. If the door starts closing too hard or drops out of line, the floor spring or pivots can be adjusted before wear sets in.
How long does it take to get a frameless glass door fitted?
Once the opening is templated, the glass is made to order and toughened, which usually takes a few weeks. Fitting a single door or screen is normally done in a day, while larger entrances or runs of screens take longer. Your written quote sets out the expected programme, and we confirm the date when the glass is ready.
Do frameless glass doors have to be safety glass?
Yes. Glass in doors is a critical location, so in England it must meet the impact requirements in Approved Document K, and frameless doors are made from toughened safety glass to suit. Toughened glass also lets the door carry its own hinges and handles. Other UK nations have equivalent guidance, and we specify the glass to suit where you are.
Do you cover Bexleyheath for frameless glass?
Yes. We can quote for frameless glass across Bexleyheath and the surrounding Greater London area, including postcode districts DA5, DA6, DA14, DA15 and DA16, and nearby Welling, Dartford and Swanley. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Bexleyheath
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.