Kensington · Greater London
Frameless Glass in Kensington
Need a clear glass entrance for a shop or office in Kensington? We can quote for frameless doors with floor springs, locks and the markings that busy entrances need.
- SW3
- SW5
- SW7
- SW10
- W8
- W10
- Guide from £795
Toughened glass door in Kensington: what to know
The guidance in England asks for glass meeting Class 3 of BS EN 12600 in most critical locations, and the higher Class 2 where a door or door side panel is more than 900mm wide. Toughened glass for doors is made to suit, and Wales, Scotland and Northern Ireland have their own guidance.
A frameless door hangs on one of three main hardware types. Patch fittings clamp to the corners and pivot on a floor spring or top pivot, glass-to-wall hinges suit lighter internal doors, and sliding gear runs the panel along a track fixed above the opening.
A floor spring sits in a steel box set into the floor below the door, controlling closing speed and hold-open. It needs a recess cut into the screed, so it is far simpler to plan before tiles, stone or timber flooring are laid than to retrofit later.
Toughened glass cannot be cut, drilled or notched once it has been toughened. Holes for patch fittings, cut-outs for locks and handles, and any shaped corners are all made before toughening, which is why we template the opening first and the glass is made to order rather than cut on site.
What's included
- Templating for made-to-measure toughened glass
- Fitting, alignment and adjustment of closing speed
- Manifestation where needed, final clean and care advice
- Survey of the opening, floor and fixing points
About Kensington for this job
- Postcodes covered
- SW3, SW5, SW7, SW10, W8, W10, W11 and the surrounding area, including Shepherds Bush, Hammersmith and Chelsea
- Coast
- Kensington is well inland, around 39 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Kensington the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Large glass panels for city shops, offices and flats can need a planned delivery, a team to carry them, and sometimes a lift or crane booking. Access through communal areas, loading limits and permitted working hours all affect the fitting day.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Kensington
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Options to choose between
Glass-to-wall hinged door
Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.
Pivot door with patches
Corner patch fittings with a floor spring or pivot, the usual choice for shop and office entrances and wide internal doors that need controlled closing.
Fixed glass screen
A non-opening panel held in slim channels or clamps, used to divide rooms, line stairs or form a side panel beside a glass door.
Frameless Glass in Kensington: questions
Do frameless glass doors have to be safety glass?
Yes. Glass in doors is a critical location, so in England it must meet the impact requirements in Approved Document K, and frameless doors are made from toughened safety glass to suit. Toughened glass also lets the door carry its own hinges and handles. Other UK nations have equivalent guidance, and we specify the glass to suit where you are.
What happens if a frameless glass door breaks?
Toughened glass breaks into small, blunt pieces rather than large shards, so the door will need to be fully replaced rather than repaired. We can make the opening safe and secure in the meantime, then remake the panel from the original measurements or a fresh template, with holes and cut-outs formed before toughening.
How do I look after a frameless glass door?
Clean the glass with a soft cloth and a non-abrasive glass cleaner, and wipe metal fittings with a damp cloth rather than harsh chemicals. Do not hang anything from the door or let it slam against a stop. If the door starts closing too hard or drops out of line, the floor spring or pivots can be adjusted before wear sets in.
What thickness of glass is used for frameless glass doors?
Frameless doors usually use 10mm or 12mm toughened safety glass. The thicker glass is generally used for taller or wider doors and for busy commercial entrances, while 10mm often suits internal doors in homes. The hardware maker's limits for panel weight and size also guide the choice, and we confirm the thickness in your written quote.
Do you cover Kensington for frameless glass?
Yes. We can quote for frameless glass across Kensington and the surrounding Greater London area, including postcode districts SW3, SW5, SW7, SW10 and W8, and nearby Shepherds Bush, Hammersmith and Chelsea. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Kensington
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.