Urmston · Greater Manchester
Frameless Glass in Urmston
Is your glass entrance door in Urmston dropping, dragging or slamming shut? We can check the floor spring and fittings, adjust them, or quote for a replacement door.
- M17
- M32
- M41
- Guide from £795
Toughened glass door for homes and businesses in Urmston
In workplaces in England, Wales and Scotland, the Workplace (Health, Safety and Welfare) Regulations 1992 require glass in doors, walls and partitions to be of safety material or protected where needed for safety, and to be marked or otherwise made apparent so people notice it.
Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory before delivery, though it cannot remove the risk entirely. It is often specified for large doors and screens in busy buildings.
Frameless glass doors are usually made from 10mm or 12mm toughened safety glass, with the thickness chosen to suit the door height and its hardware. With no frame, the glass itself carries the hinges, handles and locks, so every fitting is specified together with the glass.
In buildings other than dwellings in England, large areas of clear glass that people could walk into need manifestation at two levels, 850–1000mm and 1400–1600mm above the floor. A frameless door with a large handle or push plate on each pane is one example the guidance accepts without markings.
What you get
- Holes and cut-outs made at the factory before toughening
- Templating for made-to-measure toughened glass
- Manifestation where needed, final clean and care advice
- Fitting, alignment and adjustment of closing speed
Local details for Urmston
- Postcodes covered
- M17, M32, M41 and the surrounding area, including Stretford, Sale and Eccles
- Coast
- Urmston is well inland, around 29 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Urmston the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.2 hours of daylight, rising to about 60° and 16.8 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Urmston
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Specification choices
Frameless sliding door
A glass panel running on top-hung sliding gear across the opening, saving floor space where a swinging door would get in the way.
Glass-to-wall hinged door
Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.
Pivot door with patches
Corner patch fittings with a floor spring or pivot, the usual choice for shop and office entrances and wide internal doors that need controlled closing.
Frameless Glass in Urmston: questions
What thickness of glass is used for frameless glass doors?
Frameless doors usually use 10mm or 12mm toughened safety glass. The thicker glass is generally used for taller or wider doors and for busy commercial entrances, while 10mm often suits internal doors in homes. The hardware maker's limits for panel weight and size also guide the choice, and we confirm the thickness in your written quote.
What affects the cost of frameless glass doors and screens?
The main cost drivers are panel size and thickness, the number of panels, the hardware type, and whether a floor spring needs a recess cutting into an existing floor. Satin or low-iron glass, special hardware finishes and difficult access also add cost. See the guide prices for typical ranges, and the written quote fixes the price for your specification.
Do frameless glass doors have to be safety glass?
Yes. Glass in doors is a critical location, so in England it must meet the impact requirements in Approved Document K, and frameless doors are made from toughened safety glass to suit. Toughened glass also lets the door carry its own hinges and handles. Other UK nations have equivalent guidance, and we specify the glass to suit where you are.
What happens if a frameless glass door breaks?
Toughened glass breaks into small, blunt pieces rather than large shards, so the door will need to be fully replaced rather than repaired. We can make the opening safe and secure in the meantime, then remake the panel from the original measurements or a fresh template, with holes and cut-outs formed before toughening.
Do you cover Urmston for frameless glass?
Yes. We can quote for frameless glass across Urmston and the surrounding Greater Manchester area, including postcode districts M17, M32 and M41, and nearby Stretford, Sale and Eccles. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Urmston
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.