Fleet · Hampshire
Frameless Glass in Fleet
Our glaziers fit frameless glass doors and fixed screens in Fleet for homes, offices and shops, matching the hardware finish to the room or shopfront.
- GU13
- GU51
- GU52
- Guide from £795
Frameless glass screens across Fleet
Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory before delivery, though it cannot remove the risk entirely. It is often specified for large doors and screens in busy buildings.
Toughened glass cannot be cut, drilled or notched once it has been toughened. Holes for patch fittings, cut-outs for locks and handles, and any shaped corners are all made before toughening, which is why we template the opening first and the glass is made to order rather than cut on site.
In England, Approved Document K treats glazing in a door within 1500mm of the floor, glazing within 300mm of a door edge and within 1500mm of the floor, and other glazing within 800mm of the floor as critical locations. Glass in these positions must break safely or be suitably protected.
In workplaces in England, Wales and Scotland, the Workplace (Health, Safety and Welfare) Regulations 1992 require glass in doors, walls and partitions to be of safety material or protected where needed for safety, and to be marked or otherwise made apparent so people notice it.
What a typical job includes
- Fitting, alignment and adjustment of closing speed
- Survey of the opening, floor and fixing points
- Holes and cut-outs made at the factory before toughening
- Manifestation where needed, final clean and care advice
About Fleet for this job
- Postcodes covered
- GU13, GU51, GU52 and the surrounding area, including Farnborough, Aldershot and Yateley
- Coast
- Fleet is well inland, around 49 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Fleet the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Fleet
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
What you can choose
Hardware finishes
Patch fittings, handles and hinges in satin or polished stainless steel, black or other finishes to match the room or shopfront.
Low-iron glass
Glass with less iron, removing the green tint seen on the edges of standard glass, so thick panels look clearer and colours stay true.
Glass-to-wall hinged door
Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.
Frameless Glass in Fleet: questions
Can a frameless glass door be fitted into my existing doorway?
Usually, yes. We survey the opening to check the head and walls can take the fixings, and template it so the glass follows any out-of-square edges. A floor spring needs a recess in the floor, so where that is not practical we may suggest a top pivot, wall hinges or sliding gear instead. Some making good of plaster may be needed.
What affects the cost of frameless glass doors and screens?
The main cost drivers are panel size and thickness, the number of panels, the hardware type, and whether a floor spring needs a recess cutting into an existing floor. Satin or low-iron glass, special hardware finishes and difficult access also add cost. See the guide prices for typical ranges, and the written quote fixes the price for your specification.
How long does it take to get a frameless glass door fitted?
Once the opening is templated, the glass is made to order and toughened, which usually takes a few weeks. Fitting a single door or screen is normally done in a day, while larger entrances or runs of screens take longer. Your written quote sets out the expected programme, and we confirm the date when the glass is ready.
Can a frameless glass door be locked?
Yes. A patch lock at the bottom of the door shoots a bolt into a keep in the floor, and a centre lock can join a pair of doors. A glass door does not offer the same resistance as a solid door, so for external entrances you may also want shutters, an alarm or laminated security glass in adjoining screens.
Do you cover Fleet for frameless glass?
Yes. We can quote for frameless glass across Fleet and the surrounding Hampshire area, including postcode districts GU13, GU51 and GU52, and nearby Farnborough, Aldershot and Yateley. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Fleet
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.