Frome · Somerset
Frameless Glass in Frome
Frameless glass in Frome starts with templating the opening, so the toughened panels are made with every hole and cut-out formed before the glass is toughened.
- BA11
- Guide from £795
About frameless glass doors in Frome
Toughened glass cannot be cut, drilled or notched once it has been toughened. Holes for patch fittings, cut-outs for locks and handles, and any shaped corners are all made before toughening, which is why we template the opening first and the glass is made to order rather than cut on site.
In workplaces in England, Wales and Scotland, the Workplace (Health, Safety and Welfare) Regulations 1992 require glass in doors, walls and partitions to be of safety material or protected where needed for safety, and to be marked or otherwise made apparent so people notice it.
A frameless door hangs on one of three main hardware types. Patch fittings clamp to the corners and pivot on a floor spring or top pivot, glass-to-wall hinges suit lighter internal doors, and sliding gear runs the panel along a track fixed above the opening.
Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory before delivery, though it cannot remove the risk entirely. It is often specified for large doors and screens in busy buildings.
What you get
- Hinges, patch fittings, floor spring or sliding gear
- Survey of the opening, floor and fixing points
- Templating for made-to-measure toughened glass
- Fitting, alignment and adjustment of closing speed
Frome at a glance
- Postcodes covered
- BA11 and the surrounding area, including Warminster, Trowbridge and Shepton Mallet
- Coast
- Frome is well inland, around 42 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Frome the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Frome
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Specification choices
Low-iron glass
Glass with less iron, removing the green tint seen on the edges of standard glass, so thick panels look clearer and colours stay true.
Hardware finishes
Patch fittings, handles and hinges in satin or polished stainless steel, black or other finishes to match the room or shopfront.
Frameless sliding door
A glass panel running on top-hung sliding gear across the opening, saving floor space where a swinging door would get in the way.
Frameless Glass in Frome: questions
Do frameless glass doors have to be safety glass?
Yes. Glass in doors is a critical location, so in England it must meet the impact requirements in Approved Document K, and frameless doors are made from toughened safety glass to suit. Toughened glass also lets the door carry its own hinges and handles. Other UK nations have equivalent guidance, and we specify the glass to suit where you are.
How do I look after a frameless glass door?
Clean the glass with a soft cloth and a non-abrasive glass cleaner, and wipe metal fittings with a damp cloth rather than harsh chemicals. Do not hang anything from the door or let it slam against a stop. If the door starts closing too hard or drops out of line, the floor spring or pivots can be adjusted before wear sets in.
Will a frameless glass door block noise and draughts?
Only partly. Frameless doors run with small gaps at the sides and bottom so the glass can swing freely, which lets some sound and air through. Clear seal strips can narrow the gaps. If you need a quiet meeting room or a draught-free external entrance, a framed or acoustic glazed system will perform better, and we can quote for both.
What thickness of glass is used for frameless glass doors?
Frameless doors usually use 10mm or 12mm toughened safety glass. The thicker glass is generally used for taller or wider doors and for busy commercial entrances, while 10mm often suits internal doors in homes. The hardware maker's limits for panel weight and size also guide the choice, and we confirm the thickness in your written quote.
Do you cover Frome for frameless glass?
Yes. We can quote for frameless glass across Frome and the surrounding Somerset area, including postcode districts BA11, and nearby Warminster, Trowbridge and Shepton Mallet. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Frome
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.