Sudbury · Suffolk
Frameless Glass in Sudbury
From glass stair screens to sliding room dividers, we can quote for frameless glass in Sudbury that opens up the space and is made from toughened safety glass.
- CO10
- Guide from £795
Glass entrance doors in Sudbury
Toughened glass cannot be cut, drilled or notched once it has been toughened. Holes for patch fittings, cut-outs for locks and handles, and any shaped corners are all made before toughening, which is why we template the opening first and the glass is made to order rather than cut on site.
A frameless door hangs on one of three main hardware types. Patch fittings clamp to the corners and pivot on a floor spring or top pivot, glass-to-wall hinges suit lighter internal doors, and sliding gear runs the panel along a track fixed above the opening.
Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory before delivery, though it cannot remove the risk entirely. It is often specified for large doors and screens in busy buildings.
For buildings other than dwellings in England, access guidance says a manual door should open with no more than 30N of force at its edge from closed to 30 degrees, and 22.5N from 30 to 60 degrees. Heavy glass doors and closers are set up with that limit in mind.
What a typical job includes
- Fitting, alignment and adjustment of closing speed
- Survey of the opening, floor and fixing points
- Hinges, patch fittings, floor spring or sliding gear
- Manifestation where needed, final clean and care advice
Local details for Sudbury
- Postcodes covered
- CO10 and the surrounding area, including Colchester, Haverhill and Braintree
- Coast
- Sudbury is well inland, around 25 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Sudbury the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.5 hours of daylight, rising to about 61° and 16.5 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Sudbury
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
What you can choose
Glass-to-wall hinged door
Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.
Frameless sliding door
A glass panel running on top-hung sliding gear across the opening, saving floor space where a swinging door would get in the way.
Pivot door with patches
Corner patch fittings with a floor spring or pivot, the usual choice for shop and office entrances and wide internal doors that need controlled closing.
Frameless Glass in Sudbury: questions
What thickness of glass is used for frameless glass doors?
Frameless doors usually use 10mm or 12mm toughened safety glass. The thicker glass is generally used for taller or wider doors and for busy commercial entrances, while 10mm often suits internal doors in homes. The hardware maker's limits for panel weight and size also guide the choice, and we confirm the thickness in your written quote.
What affects the cost of frameless glass doors and screens?
The main cost drivers are panel size and thickness, the number of panels, the hardware type, and whether a floor spring needs a recess cutting into an existing floor. Satin or low-iron glass, special hardware finishes and difficult access also add cost. See the guide prices for typical ranges, and the written quote fixes the price for your specification.
Can a frameless glass door be fitted into my existing doorway?
Usually, yes. We survey the opening to check the head and walls can take the fixings, and template it so the glass follows any out-of-square edges. A floor spring needs a recess in the floor, so where that is not practical we may suggest a top pivot, wall hinges or sliding gear instead. Some making good of plaster may be needed.
Do glass doors and screens need markings on them?
In buildings other than dwellings in England, large clear glass that people could walk into needs manifestation at two heights, 850–1000mm and 1400–1600mm from the floor. Workplace rules across Great Britain also require glass to be made apparent where needed. Homes are not covered by the manifestation guidance, though a frosted band can still be sensible.
Do you cover Sudbury for frameless glass?
Yes. We can quote for frameless glass across Sudbury and the surrounding Suffolk area, including postcode districts CO10, and nearby Colchester, Haverhill and Braintree. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Sudbury
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.