Bedworth · Warwickshire
Frameless Glass in Bedworth
Need a clear glass entrance for a shop or office in Bedworth? We can quote for frameless doors with floor springs, locks and the markings that busy entrances need.
- CV12
- Guide from £795
Toughened glass door in Bedworth
Frameless glass doors are usually made from 10mm or 12mm toughened safety glass, with the thickness chosen to suit the door height and its hardware. With no frame, the glass itself carries the hinges, handles and locks, so every fitting is specified together with the glass.
Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory before delivery, though it cannot remove the risk entirely. It is often specified for large doors and screens in busy buildings.
In buildings other than dwellings in England, large areas of clear glass that people could walk into need manifestation at two levels, 850–1000mm and 1400–1600mm above the floor. A frameless door with a large handle or push plate on each pane is one example the guidance accepts without markings.
A floor spring sits in a steel box set into the floor below the door, controlling closing speed and hold-open. It needs a recess cut into the screed, so it is far simpler to plan before tiles, stone or timber flooring are laid than to retrofit later.
What a typical job includes
- Survey of the opening, floor and fixing points
- Templating for made-to-measure toughened glass
- Fitting, alignment and adjustment of closing speed
- Hinges, patch fittings, floor spring or sliding gear
Local details for Bedworth
- Postcodes covered
- CV12 and the surrounding area, including Nuneaton, Coventry and Hinckley
- Coast
- Bedworth is well inland, around 100 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Bedworth the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Bedworth
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
What you can choose
Low-iron glass
Glass with less iron, removing the green tint seen on the edges of standard glass, so thick panels look clearer and colours stay true.
Pivot door with patches
Corner patch fittings with a floor spring or pivot, the usual choice for shop and office entrances and wide internal doors that need controlled closing.
Glass-to-wall hinged door
Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.
Frameless Glass in Bedworth: questions
How long does it take to get a frameless glass door fitted?
Once the opening is templated, the glass is made to order and toughened, which usually takes a few weeks. Fitting a single door or screen is normally done in a day, while larger entrances or runs of screens take longer. Your written quote sets out the expected programme, and we confirm the date when the glass is ready.
Can a frameless glass door be fitted into my existing doorway?
Usually, yes. We survey the opening to check the head and walls can take the fixings, and template it so the glass follows any out-of-square edges. A floor spring needs a recess in the floor, so where that is not practical we may suggest a top pivot, wall hinges or sliding gear instead. Some making good of plaster may be needed.
Do glass doors and screens need markings on them?
In buildings other than dwellings in England, large clear glass that people could walk into needs manifestation at two heights, 850–1000mm and 1400–1600mm from the floor. Workplace rules across Great Britain also require glass to be made apparent where needed. Homes are not covered by the manifestation guidance, though a frosted band can still be sensible.
What affects the cost of frameless glass doors and screens?
The main cost drivers are panel size and thickness, the number of panels, the hardware type, and whether a floor spring needs a recess cutting into an existing floor. Satin or low-iron glass, special hardware finishes and difficult access also add cost. See the guide prices for typical ranges, and the written quote fixes the price for your specification.
Do you cover Bedworth for frameless glass?
Yes. We can quote for frameless glass across Bedworth and the surrounding Warwickshire area, including postcode districts CV12, and nearby Nuneaton, Coventry and Hinckley. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Bedworth
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.