Truro · Cornwall
Glass Balustrades in Truro
Is a loose or chipped balustrade panel worrying you in Truro? We can measure, remake and refit the glass, and check the channel and fixings while we are there.
- TR1
- Guide from £1,095
About glass balcony balustrade in Truro
A frameless channel only performs as well as the structure it is bolted into. Channels need a solid base such as concrete or steel, and timber decks or floor joists often need extra steelwork or blocking. Checking the substrate at survey stage avoids panels that flex or loosen under load.
Under the guidance used in England, guarding is generally expected where there is a drop of more than 600mm in or around a dwelling, or more than 380mm in other buildings. Below those drops a glass screen is a design choice rather than a requirement, though the glass still has to suit its position.
The fixing style changes both the look and the work involved. Recessed channels sit flush with the floor and need planning before the floor finish goes down, surface channels sit on top with a cover strip, and side-fixed systems bolt to the face of a slab or stair to keep floor space clear.
Toughened glass cannot be cut, drilled or shaped once it has been toughened, so every hole, notch and corner is made before processing. That is why we template on site and order each panel to exact sizes. A panel made to the wrong measurement has to be remade, not trimmed.
Included as standard
- Channels, clamps, posts or spigots in your chosen finish
- Site survey, including a check of the structure behind fixings
- Templating and measuring for made-to-measure glass panels
- Fitting, levelling and alignment of every panel

Truro at a glance
- Postcodes covered
- TR1 and the surrounding area, including Falmouth, Redruth and Newquay
- Coast
- Truro sits roughly 6 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. Salt air attacks lower-grade metal fittings and leaves deposits on glass, so balustrades near the coast need hardware and finishes suited to marine exposure, well-drained channels and regular rinsing. Strong onshore wind on exposed balconies also affects the glass and fixing specification.
- Daylight and sun
- In Truro the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.8 hours of daylight, rising to about 63° and 16.2 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Older rural homes often have uneven floors, timber structures and stone walls, all of which affect how channels and posts are fixed. Exposed decks and hillside terraces also face strong wind, so the glass and fixing system are chosen for that exposure.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Truro
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
What you can choose
Top handrail
A capping rail along the top edge in stainless steel, aluminium or timber, which ties panels together and gives a firm hand hold.
Low-iron glass
Glass with less iron, which removes the green tint seen on the edges of standard glass, most noticeable in thick laminated panels.
Spigot fixed
Individual spigots hold each panel at its base instead of a continuous channel. Common on decking, around pools and in gardens.
Glass Balustrades in Truro: questions
Do glass balustrades need a handrail?
Not always. Under BS 6180, a handrail should be used where the glass guards a drop of more than 600mm, unless laminated toughened glass is used that would stay in place if a panel broke. Frameless systems without a top rail therefore use laminated glass, while toughened-only glass needs a handrail tied across the panels. We confirm which applies to your job at survey.
Is outdoor balustrade glass hard to keep clean?
Outdoor glass collects rain marks, pollen and dust, so expect to clean it about as often as your windows. A soft cloth, warm water and a non-abrasive cleaner are enough. Avoid scouring pads and harsh chemicals on both the glass and the stainless or powder-coated fittings, and rinse grit and salt out of channels.
Can I fit a glass balustrade kit myself?
Kits are sold for self-fitting, but a balustrade's safety depends on the right anchors, a sound substrate, the correct glass for the system and accurate alignment. Fixing into weak timber or using toughened-only glass in a frameless channel can leave a barrier that fails under load. We supply and fit as one job and check each fixing before handover.
How high does a glass balustrade have to be?
In England, the minimum height in a single-family home is 900mm for stairs, landings and internal floor edges, and 1100mm for external balconies, Juliet balconies and roof edges. Other building types have their own heights in the same guidance. Wales, Scotland and Northern Ireland publish separate guidance, so we confirm the figure that applies to your property.
Do you cover Truro for glass balustrades?
Yes. We can quote for glass balustrades across Truro and the surrounding Cornwall area, including postcode districts TR1, and nearby Falmouth, Redruth and Newquay. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Truro
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.