Ealing · Greater London
Glass Balustrades in Ealing
Our glaziers fit glass balustrades for homes and commercial buildings in Ealing, using laminated toughened glass for frameless runs and matching rails and fittings to the space.
- W3
- W5
- W7
- W13
- Guide from £1,095
About glass balustrades in Ealing
Toughened glass cannot be cut, drilled or shaped once it has been toughened, so every hole, notch and corner is made before processing. That is why we template on site and order each panel to exact sizes. A panel made to the wrong measurement has to be remade, not trimmed.
BS 6180, the code of practice for barriers, says a handrail should be used where glass guards a drop of more than 600mm, unless the glass is laminated toughened glass that would stay in place if a panel failed. That is why frameless balustrades without a top rail use laminated glass.
In England, Approved Document K sets minimum guarding heights. In a single-family home, stairs, landings and internal floor edges need at least 900mm, while external balconies, Juliet balconies and roof edges need at least 1100mm. Wales, Scotland and Northern Ireland publish their own guidance, so we check the figure that applies.
Where a building may be used by children under five, the guidance in England says guarding should not let a 100mm sphere pass through any opening and should not be easy to climb. Solid glass helps on both counts, but gaps between panels, posts, walls and the floor still need checking.
What you get
- Site survey, including a check of the structure behind fixings
- Channels, clamps, posts or spigots in your chosen finish
- Final clean, film removal and care advice
- Fitting, levelling and alignment of every panel

Local details for Ealing
- Postcodes covered
- W3, W5, W7, W13 and the surrounding area, including Acton, Greenford and Chiswick
- Coast
- Ealing is well inland, around 47 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Ealing the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Flats and town houses often mean carrying long panels through stairwells or lifting them by hand to upper balconies, so panels may need splitting. Parking and loading limits, building management rules and leaseholder consents can all affect when we fit.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Ealing
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
What you can choose
Tinted or satin glass
Grey, bronze or satin-etched glass that adds privacy or cuts glare on balconies and terraces overlooked by neighbours or streets.
Post and clamp
Glass panels clamped between stainless steel or powder-coated posts. Often uses thinner glass and suits long runs, decking and simpler budgets.
Low-iron glass
Glass with less iron, which removes the green tint seen on the edges of standard glass, most noticeable in thick laminated panels.
Glass Balustrades in Ealing: questions
Is outdoor balustrade glass hard to keep clean?
Outdoor glass collects rain marks, pollen and dust, so expect to clean it about as often as your windows. A soft cloth, warm water and a non-abrasive cleaner are enough. Avoid scouring pads and harsh chemicals on both the glass and the stainless or powder-coated fittings, and rinse grit and salt out of channels.
What happens if a balustrade panel breaks?
With laminated glass, the broken panel is held together by its interlayer and should stay in place until it is replaced. With toughened-only glass, the panel breaks into small pieces and the handrail becomes the barrier. Either way, keep people away from the edge and contact us so we can make the area safe and remake the panel to size.
How high does a glass balustrade have to be?
In England, the minimum height in a single-family home is 900mm for stairs, landings and internal floor edges, and 1100mm for external balconies, Juliet balconies and roof edges. Other building types have their own heights in the same guidance. Wales, Scotland and Northern Ireland publish separate guidance, so we confirm the figure that applies to your property.
Can a glass balustrade be fitted to timber decking?
Yes, but the deck frame usually needs strengthening first. Glass guarding puts significant load into its fixings, and ordinary deck joists are not designed to take it. We check the frame at survey and may recommend steel brackets, extra blocking, or a post or spigot system instead of a long continuous channel.
Do you cover Ealing for glass balustrades?
Yes. We can quote for glass balustrades across Ealing and the surrounding Greater London area, including postcode districts W3, W5, W7 and W13, and nearby Acton, Greenford and Chiswick. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Ealing
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.