Feltham · Greater London
Glass Balustrades in Feltham
Is a loose or chipped balustrade panel worrying you in Feltham? We can measure, remake and refit the glass, and check the channel and fixings while we are there.
- TW14
- TW13
- TW4
- Guide from £1,095
Glass balustrades in Feltham: what to know
The interlayer inside laminated glass decides how a broken panel behaves. Standard PVB holds the fragments together but can let a fully broken panel sag, while stiffer structural interlayers help it stay upright. The right choice depends on whether a handrail is fitted and how exposed the balustrade is.
Under the guidance used in England, guarding is generally expected where there is a drop of more than 600mm in or around a dwelling, or more than 380mm in other buildings. Below those drops a glass screen is a design choice rather than a requirement, though the glass still has to suit its position.
A frameless channel only performs as well as the structure it is bolted into. Channels need a solid base such as concrete or steel, and timber decks or floor joists often need extra steelwork or blocking. Checking the substrate at survey stage avoids panels that flex or loosen under load.
Glass balustrades need little upkeep beyond cleaning with a soft cloth and a non-abrasive glass cleaner. Outdoors, rinse grit and salt from fittings, keep drainage slots in channels clear, and check clamps, spigots and handrail joints once a year for any loosening or movement.
What's included
- Final clean, film removal and care advice
- Templating and measuring for made-to-measure glass panels
- Channels, clamps, posts or spigots in your chosen finish
- Fitting, levelling and alignment of every panel
Feltham at a glance
- Postcodes covered
- TW14, TW13, TW4 and the surrounding area, including Hanworth, Ashford (Surrey) and Hounslow
- Coast
- Feltham is well inland, around 54 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Feltham the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Flats and town houses often mean carrying long panels through stairwells or lifting them by hand to upper balconies, so panels may need splitting. Parking and loading limits, building management rules and leaseholder consents can all affect when we fit.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Feltham
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
What you can choose
Side-fixed standoffs
Glass fixed to the face of a slab, stair stringer or balcony edge with round standoffs through drilled holes, keeping the walking surface completely clear.
Low-iron glass
Glass with less iron, which removes the green tint seen on the edges of standard glass, most noticeable in thick laminated panels.
Post and clamp
Glass panels clamped between stainless steel or powder-coated posts. Often uses thinner glass and suits long runs, decking and simpler budgets.
Glass Balustrades in Feltham: questions
Can I fit a glass balustrade kit myself?
Kits are sold for self-fitting, but a balustrade's safety depends on the right anchors, a sound substrate, the correct glass for the system and accurate alignment. Fixing into weak timber or using toughened-only glass in a frameless channel can leave a barrier that fails under load. We supply and fit as one job and check each fixing before handover.
What happens if a balustrade panel breaks?
With laminated glass, the broken panel is held together by its interlayer and should stay in place until it is replaced. With toughened-only glass, the panel breaks into small pieces and the handrail becomes the barrier. Either way, keep people away from the edge and contact us so we can make the area safe and remake the panel to size.
How long does it take to fit a glass balustrade?
Most domestic balustrades take one or two days on site once the glass has arrived. Because toughened and laminated glass is made to measure after templating, there is a manufacturing lead time, often several weeks. Your written quote sets out the expected programme, and we confirm a fitting date once the glass is ready.
How high does a glass balustrade have to be?
In England, the minimum height in a single-family home is 900mm for stairs, landings and internal floor edges, and 1100mm for external balconies, Juliet balconies and roof edges. Other building types have their own heights in the same guidance. Wales, Scotland and Northern Ireland publish separate guidance, so we confirm the figure that applies to your property.
Do you cover Feltham for glass balustrades?
Yes. We can quote for glass balustrades across Feltham and the surrounding Greater London area, including postcode districts TW14, TW13 and TW4, and nearby Hanworth, Ashford (Surrey) and Hounslow. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Feltham
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.