New Malden · Greater London
Glass Balustrades in New Malden
From mezzanines to roof terraces, we can quote for glass guarding in New Malden that lets daylight through while giving a firm, compliant barrier at the edge.
- KT3
- KT5
- KT1
- Guide from £1,095
New Malden: glass balcony balustrade
Glass guarding must resist the horizontal loads set for how the space is used, and those loads rise from a private home to offices, shops and busy public areas. Glass thickness, fixing system and anchors are matched to that load, so a system suited to a house stair may not suit a bar terrace.
Glass balustrades need little upkeep beyond cleaning with a soft cloth and a non-abrasive glass cleaner. Outdoors, rinse grit and salt from fittings, keep drainage slots in channels clear, and check clamps, spigots and handrail joints once a year for any loosening or movement.
BS 6180, the code of practice for barriers, says a handrail should be used where glass guards a drop of more than 600mm, unless the glass is laminated toughened glass that would stay in place if a panel failed. That is why frameless balustrades without a top rail use laminated glass.
Toughened glass cannot be cut, drilled or shaped once it has been toughened, so every hole, notch and corner is made before processing. That is why we template on site and order each panel to exact sizes. A panel made to the wrong measurement has to be remade, not trimmed.
Included as standard
- Toughened or laminated safety glass to the agreed specification
- Channels, clamps, posts or spigots in your chosen finish
- Fitting, levelling and alignment of every panel
- Final clean, film removal and care advice
Working in New Malden
- Postcodes covered
- KT3, KT5, KT1 and the surrounding area, including Surbiton, Kingston upon Thames and Morden
- Coast
- New Malden is well inland, around 44 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In New Malden the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Older rural homes often have uneven floors, timber structures and stone walls, all of which affect how channels and posts are fixed. Exposed decks and hillside terraces also face strong wind, so the glass and fixing system are chosen for that exposure.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in New Malden
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
Specification choices
Side-fixed standoffs
Glass fixed to the face of a slab, stair stringer or balcony edge with round standoffs through drilled holes, keeping the walking surface completely clear.
Spigot fixed
Individual spigots hold each panel at its base instead of a continuous channel. Common on decking, around pools and in gardens.
Post and clamp
Glass panels clamped between stainless steel or powder-coated posts. Often uses thinner glass and suits long runs, decking and simpler budgets.
Glass Balustrades in New Malden: questions
What happens if a balustrade panel breaks?
With laminated glass, the broken panel is held together by its interlayer and should stay in place until it is replaced. With toughened-only glass, the panel breaks into small pieces and the handrail becomes the barrier. Either way, keep people away from the edge and contact us so we can make the area safe and remake the panel to size.
Does a new glass balustrade need building control approval?
New guarding that forms part of wider building work, such as a new balcony, loft conversion or staircase, is normally checked by building control as part of that project. Whether a standalone replacement needs its own application depends on the work and on the nation, because England, Wales, Scotland and Northern Ireland have separate systems. We can advise at survey.
How high does a glass balustrade have to be?
In England, the minimum height in a single-family home is 900mm for stairs, landings and internal floor edges, and 1100mm for external balconies, Juliet balconies and roof edges. Other building types have their own heights in the same guidance. Wales, Scotland and Northern Ireland publish separate guidance, so we confirm the figure that applies to your property.
Do glass balustrades need a handrail?
Not always. Under BS 6180, a handrail should be used where the glass guards a drop of more than 600mm, unless laminated toughened glass is used that would stay in place if a panel broke. Frameless systems without a top rail therefore use laminated glass, while toughened-only glass needs a handrail tied across the panels. We confirm which applies to your job at survey.
Do you cover New Malden for glass balustrades?
Yes. We can quote for glass balustrades across New Malden and the surrounding Greater London area, including postcode districts KT3, KT5 and KT1, and nearby Surbiton, Kingston upon Thames and Morden. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in New Malden
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.