Wigan · Greater Manchester
Glass Balustrades in Wigan
Glass balustrades in Wigan start with a survey of the drop, the structure and how the space is used, followed by a written quote that fixes the price for the specification shown.
- WN1
- WN3
- WN5
- Guide from £1,095
Wigan: glass balustrades
BS 6180, the code of practice for barriers, says a handrail should be used where glass guards a drop of more than 600mm, unless the glass is laminated toughened glass that would stay in place if a panel failed. That is why frameless balustrades without a top rail use laminated glass.
Toughened glass can occasionally break without impact because of tiny nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory, but it does not remove it entirely, which is one more reason laminated glass is used in guarding.
Toughened glass cannot be cut, drilled or shaped once it has been toughened, so every hole, notch and corner is made before processing. That is why we template on site and order each panel to exact sizes. A panel made to the wrong measurement has to be remade, not trimmed.
Under the guidance used in England, guarding is generally expected where there is a drop of more than 600mm in or around a dwelling, or more than 380mm in other buildings. Below those drops a glass screen is a design choice rather than a requirement, though the glass still has to suit its position.
Included as standard
- Channels, clamps, posts or spigots in your chosen finish
- Fitting, levelling and alignment of every panel
- Templating and measuring for made-to-measure glass panels
- Site survey, including a check of the structure behind fixings
About Wigan for this job
- Postcodes covered
- WN1, WN3, WN5 and the surrounding area, including Hindley, Ashton-in-Makerfield and Westhoughton
- Coast
- Wigan is well inland, around 23 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Wigan the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.2 hours of daylight, rising to about 60° and 16.8 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Flats and town houses often mean carrying long panels through stairwells or lifting them by hand to upper balconies, so panels may need splitting. Parking and loading limits, building management rules and leaseholder consents can all affect when we fit.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Wigan
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
Specification choices
Side-fixed standoffs
Glass fixed to the face of a slab, stair stringer or balcony edge with round standoffs through drilled holes, keeping the walking surface completely clear.
Spigot fixed
Individual spigots hold each panel at its base instead of a continuous channel. Common on decking, around pools and in gardens.
Low-iron glass
Glass with less iron, which removes the green tint seen on the edges of standard glass, most noticeable in thick laminated panels.
Glass Balustrades in Wigan: questions
What affects the cost of a glass balustrade?
The main cost drivers are the length of the run, the number of panels and corners, the glass thickness and interlayer, and the fixing system. A top handrail, low-iron or tinted glass, special hardware finishes and difficult access all add to the price. See the guide prices for typical ranges, and your written quote fixes the price for the specification shown.
Can I fit a glass balustrade kit myself?
Kits are sold for self-fitting, but a balustrade's safety depends on the right anchors, a sound substrate, the correct glass for the system and accurate alignment. Fixing into weak timber or using toughened-only glass in a frameless channel can leave a barrier that fails under load. We supply and fit as one job and check each fixing before handover.
Can a glass balustrade be fitted to timber decking?
Yes, but the deck frame usually needs strengthening first. Glass guarding puts significant load into its fixings, and ordinary deck joists are not designed to take it. We check the frame at survey and may recommend steel brackets, extra blocking, or a post or spigot system instead of a long continuous channel.
How high does a glass balustrade have to be?
In England, the minimum height in a single-family home is 900mm for stairs, landings and internal floor edges, and 1100mm for external balconies, Juliet balconies and roof edges. Other building types have their own heights in the same guidance. Wales, Scotland and Northern Ireland publish separate guidance, so we confirm the figure that applies to your property.
Do you cover Wigan for glass balustrades?
Yes. We can quote for glass balustrades across Wigan and the surrounding Greater Manchester area, including postcode districts WN1, WN3 and WN5, and nearby Hindley, Ashton-in-Makerfield and Westhoughton. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Wigan
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.