Call 0800 088 6248

Worthing · West Sussex

Glass Balustrades in Worthing

Is a loose or chipped balustrade panel worrying you in Worthing? We can measure, remake and refit the glass, and check the channel and fixings while we are there.

  • BN11
  • BN12
  • BN13
  • BN14
  • Guide from £1,095

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

About frameless glass balustrade in Worthing

Toughened glass cannot be cut, drilled or shaped once it has been toughened, so every hole, notch and corner is made before processing. That is why we template on site and order each panel to exact sizes. A panel made to the wrong measurement has to be remade, not trimmed.

Under the guidance used in England, guarding is generally expected where there is a drop of more than 600mm in or around a dwelling, or more than 380mm in other buildings. Below those drops a glass screen is a design choice rather than a requirement, though the glass still has to suit its position.

BS 6180, the code of practice for barriers, says a handrail should be used where glass guards a drop of more than 600mm, unless the glass is laminated toughened glass that would stay in place if a panel failed. That is why frameless balustrades without a top rail use laminated glass.

The interlayer inside laminated glass decides how a broken panel behaves. Standard PVB holds the fragments together but can let a fully broken panel sag, while stiffer structural interlayers help it stay upright. The right choice depends on whether a handrail is fitted and how exposed the balustrade is.

Included as standard

  • Final clean, film removal and care advice
  • Channels, clamps, posts or spigots in your chosen finish
  • Templating and measuring for made-to-measure glass panels
  • Site survey, including a check of the structure behind fixings
Frameless glass balustrade around a raised deck overlooking a garden

Local details for Worthing

Postcodes covered
BN11, BN12, BN13, BN14 and the surrounding area, including Littlehampton, Brighton & Hove and Bognor Regis
Coast
Worthing is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Salt air attacks lower-grade metal fittings and leaves deposits on glass, so balustrades near the coast need hardware and finishes suited to marine exposure, well-drained channels and regular rinsing. Strong onshore wind on exposed balconies also affects the glass and fixing specification.
Daylight and sun
In Worthing the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 63° and 16.3 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
Access and setting
Flats and town houses often mean carrying long panels through stairwells or lifting them by hand to upper balconies, so panels may need splitting. Parking and loading limits, building management rules and leaseholder consents can all affect when we fit.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Worthing

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Frameless, 3 m run£1,095 – £1,395
Frameless, 6 m run£2,195 – £2,795
Post and clamp, 6 m run£1,395 – £1,695

Get a guide price for your size

Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.

What you can choose

Low-iron glass

Glass with less iron, which removes the green tint seen on the edges of standard glass, most noticeable in thick laminated panels.

Side-fixed standoffs

Glass fixed to the face of a slab, stair stringer or balcony edge with round standoffs through drilled holes, keeping the walking surface completely clear.

Frameless channel system

Laminated toughened glass held in a continuous floor channel, giving a clean edge with no posts. Suits balconies, terraces, decks and modern stairs.

Glass Balustrades in Worthing: questions

Does a new glass balustrade need building control approval?

New guarding that forms part of wider building work, such as a new balcony, loft conversion or staircase, is normally checked by building control as part of that project. Whether a standalone replacement needs its own application depends on the work and on the nation, because England, Wales, Scotland and Northern Ireland have separate systems. We can advise at survey.

Do glass balustrades need a handrail?

Not always. Under BS 6180, a handrail should be used where the glass guards a drop of more than 600mm, unless laminated toughened glass is used that would stay in place if a panel broke. Frameless systems without a top rail therefore use laminated glass, while toughened-only glass needs a handrail tied across the panels. We confirm which applies to your job at survey.

Can I fit a glass balustrade kit myself?

Kits are sold for self-fitting, but a balustrade's safety depends on the right anchors, a sound substrate, the correct glass for the system and accurate alignment. Fixing into weak timber or using toughened-only glass in a frameless channel can leave a barrier that fails under load. We supply and fit as one job and check each fixing before handover.

Is outdoor balustrade glass hard to keep clean?

Outdoor glass collects rain marks, pollen and dust, so expect to clean it about as often as your windows. A soft cloth, warm water and a non-abrasive cleaner are enough. Avoid scouring pads and harsh chemicals on both the glass and the stainless or powder-coated fittings, and rinse grit and salt out of channels.

Do you cover Worthing for glass balustrades?

Yes. We can quote for glass balustrades across Worthing and the surrounding West Sussex area, including postcode districts BN11, BN12, BN13 and BN14, and nearby Littlehampton, Brighton & Hove and Bognor Regis. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Worthing

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote