Call 0800 088 6248

Dunbar · Edinburgh & the Lothians

Glass Splashbacks in Dunbar

Is stained grout behind your hob in Dunbar hard to keep clean? We can replace tired tiles with a smooth, wipe-clean toughened glass panel in your chosen colour.

  • EH42
  • Guide from £225

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Glass splashback behind hob in Dunbar

After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on colour and finish. Fitting a typical kitchen takes part of a day, and the kitchen can normally be used again straight afterwards, though the silicone needs time to cure fully.

Colours look different on screens, in daylight and under kitchen lighting, so choose from a physical glass sample rather than a website or paint chart. We can match many paint and RAL colours, and a sample panel viewed in your own kitchen avoids surprises.

Hob makers set minimum clearances between the hob and nearby wall surfaces, and gas hobs in particular can have specific requirements. We check your hob's installation instructions before ordering so the glass, its cut-outs and any joints sit where the manufacturer allows.

Splashbacks are made from toughened glass because it copes with heat from a hob and with the stress around socket cut-outs far better than ordinary glass. Untoughened coloured glass is more prone to cracking behind a hob or across a cut-out, so we only fit toughened panels.

Included as standard

  • Toughened glass made to template with factory cut-outs
  • Back-painting to your chosen colour or finish
  • Survey and templating after worktops and hob are fitted
  • Silicone-finished edges, final clean and care advice
Pale green glass splashback behind a hob in a white kitchen

About Dunbar for this job

Postcodes covered
EH42 and the surrounding area, including Tranent, Eyemouth and Musselburgh
Coast
Dunbar is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Daylight and sun
In Dunbar the midwinter sun reaches about 11° above the horizon at noon, with roughly 6.7 hours of daylight, rising to about 57° and 17.3 hours in midsummer. Glossy glass reflects light from windows and under-cabinet lighting, brightening a dark kitchen. Low winter sun hitting a glass wall can cause glare, so a satin finish may suit a splashback that faces a south-facing window.
Access and setting
Older rural homes often have uneven solid walls with lime plaster or stone, so the wall may need making flat before glass can be bonded. Where a range cooker is fitted, its heat and clearance needs are checked before ordering.
Rules in Scotland
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.

Guide prices in Dunbar

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Hob splashback, 900 × 750 mm£225 – £285
Run behind worktop, 2400 × 600 mm£395 – £515
Low-iron, 900 × 750 mm£235 – £295

Get a guide price for your size

Choosing your glass splashbacks

Low-iron glass

Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.

Printed design

A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.

Back-painted colour

Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.

Glass Splashbacks in Dunbar: questions

When should my glass splashback be measured?

Your splashback should be templated after the worktops, units and hob are installed and any electrical work is finished. The glass is made to the exact finished dimensions, including socket positions, so measuring from plans or before worktops go in often leads to panels that do not fit and have to be remade.

Can a glass splashback go behind a hob?

Yes, provided it is toughened glass and the hob maker's clearances are followed. Toughened glass copes with the heat from a hob far better than ordinary glass, and it is what we fit behind cookers. Some gas hobs need a minimum gap to the wall, so we check your hob's instructions before the glass is ordered.

How do I clean a glass splashback?

Wipe it with a soft cloth and warm soapy water, or a non-abrasive glass cleaner, then buff dry for a streak-free finish. Grease behind the hob comes off easily because there are no grout lines. Avoid scourers, abrasive creams and blades, which can scratch the glass, and do not use cleaners that could seep behind the edges.

What affects the cost of a glass splashback?

The main cost drivers are the total glass area, the number of panels and joints, the number of socket and switch cut-outs, the colour and glass type, and how easy the wall is to reach. Low-iron glass, metallic or printed finishes and shaped panels add cost. See the guide prices for typical ranges.

Do you cover Dunbar for glass splashbacks?

Yes. We can quote for glass splashbacks across Dunbar and the surrounding Edinburgh & the Lothians area, including postcode districts EH42, and nearby Tranent, Eyemouth and Musselburgh. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Dunbar

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote