Essex · England
Glass Splashbacks in Essex
From a single panel behind a hob to a full kitchen wall, we can quote for glass splashbacks in Essex with joints planned neatly at corners and natural breaks.
- Guide from £225
- 21 towns covered
- Postcode areas CB, CM, CO, EN, IG, RM, SS
Kitchen glass splashback across Essex
Standard glass has a green tint that shows through back-painted colours, especially whites, creams and pale greys. Low-iron glass contains less iron, removes most of that tint and keeps the painted colour close to the sample, so it is the usual choice for light colours.
The price depends on the total glass area, the number of panels and joints, the number of cut-outs, the colour and glass type, and access to the wall. Low-iron glass, metallic or printed finishes and complex shapes add cost. See the guide prices for typical ranges.
Colours look different on screens, in daylight and under kitchen lighting, so choose from a physical glass sample rather than a website or paint chart. We can match many paint and RAL colours, and a sample panel viewed in your own kitchen avoids surprises.
Splashbacks are made from toughened glass because it copes with heat from a hob and with the stress around socket cut-outs far better than ordinary glass. Untoughened coloured glass is more prone to cracking behind a hob or across a cut-out, so we only fit toughened panels.
Towns we cover for glass splashbacks in Essex
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Essex
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Essex has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Kitchens in flats and terraces often have narrow access and tight stairs, so long splashbacks may be split into shorter panels with planned joints. Parking for the fitting team and building rules on working hours can also affect scheduling.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Metallic or sparkle finish
Back-painted glass with metallic or fine sparkle effects, adding depth and reflection without the upkeep of polished metal.
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Low-iron glass
Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.
Clear glass panel
Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.
Glass Splashbacks in Essex: questions
Can I fit a glass splashback myself?
It is possible, but the risks are mostly in measuring and handling. A small error in templating or a socket position means the toughened panel has to be remade, because it cannot be trimmed. Large panels are heavy and awkward to place without damaging worktops, and the adhesive must suit the painted back. We measure, make and fit as one job.
Can you cut holes in a glass splashback for sockets?
Yes. Socket, switch and extractor cut-outs are made at the factory before the glass is toughened, because toughened glass cannot be cut afterwards. That means socket positions must be final when we template. If sockets need moving or adding, a qualified electrician should do that first, and we template around the new positions.
Can a glass splashback go behind a hob?
Yes, provided it is toughened glass and the hob maker's clearances are followed. Toughened glass copes with the heat from a hob far better than ordinary glass, and it is what we fit behind cookers. Some gas hobs need a minimum gap to the wall, so we check your hob's instructions before the glass is ordered.
How do you match the colour of a glass splashback?
We can match many paint and RAL colours, and the most reliable way to choose is from a physical glass sample viewed in your own kitchen. Colours look different on screens and under different lighting. For pale colours we usually suggest low-iron glass, because standard glass adds a green tint to the painted back.
Which parts of Essex do you cover for glass splashbacks?
We cover the whole of Essex, including Southend-on-Sea, Basildon, Colchester, Chelmsford and Harlow, and postcode areas CB, CM, CO, EN, IG, RM, SS. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Essex
- Replacement Glass in Essex
- Misted Glass Repair in Essex
- Emergency Glazing in Essex
- Safety Glass in Essex
- Window Repairs in Essex
- Window Film in Essex
- uPVC Windows in Essex
- Aluminium Windows in Essex
- Sash Windows in Essex
- Composite Doors in Essex
- Bifold Doors in Essex
- Sliding Doors in Essex
- Secondary Glazing in Essex
- Roof Lanterns in Essex
- Glass Balustrades in Essex
- Frameless Glass in Essex
- Shower Screens in Essex
- Bespoke Mirrors in Essex
- Glass Roofs in Essex
- Shopfront Glazing in Essex
- Curtain Walling in Essex
- Glass Partitions in Essex
- Property Glazing in Essex
Get a written quote in Essex
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.