Fife · Scotland
Glass Splashbacks in Fife
Want a wipe-clean wall behind a basin or vanity in Fife? We can quote for toughened glass splashbacks in colours, satin finishes or clear glass over a feature wall.
- Guide from £225
- 8 towns covered
- Postcode areas DD, KY
Toughened glass splashback in Fife: what to know
The price depends on the total glass area, the number of panels and joints, the number of cut-outs, the colour and glass type, and access to the wall. Low-iron glass, metallic or printed finishes and complex shapes add cost. See the guide prices for typical ranges.
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on colour and finish. Fitting a typical kitchen takes part of a day, and the kitchen can normally be used again straight afterwards, though the silicone needs time to cure fully.
The wall behind a splashback must be flat, sound and dry so the adhesive bonds evenly. Old tiles are usually removed and the wall made good, because uneven surfaces show through the glass and can create stress points behind the panel.
Toughened glass cannot be cut or drilled after toughening, so every socket, switch, extractor and window-reveal cut-out is made beforehand. Sockets cannot be moved after the glass is ordered without remaking the panel, so electrical positions need to be final at templating.
Towns we cover for glass splashbacks in Fife
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Fife
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Fife has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Older rural homes often have uneven solid walls with lime plaster or stone, so the wall may need making flat before glass can be bonded. Where a range cooker is fitted, its heat and clearance needs are checked before ordering.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Printed design
A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.
Clear glass panel
Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Metallic or sparkle finish
Back-painted glass with metallic or fine sparkle effects, adding depth and reflection without the upkeep of polished metal.
Glass Splashbacks in Fife: questions
Can a glass splashback be fitted over existing tiles?
It is usually better to remove the tiles and make the wall good first. Glass needs a flat, sound surface for the adhesive to bond evenly, and grout lines, uneven tiles or loose tiles can show through or create stress points. Removing tiles also stops the glass standing too far forward of the worktop and sockets.
Can I fit a glass splashback myself?
It is possible, but the risks are mostly in measuring and handling. A small error in templating or a socket position means the toughened panel has to be remade, because it cannot be trimmed. Large panels are heavy and awkward to place without damaging worktops, and the adhesive must suit the painted back. We measure, make and fit as one job.
Can you cut holes in a glass splashback for sockets?
Yes. Socket, switch and extractor cut-outs are made at the factory before the glass is toughened, because toughened glass cannot be cut afterwards. That means socket positions must be final when we template. If sockets need moving or adding, a qualified electrician should do that first, and we template around the new positions.
When should my glass splashback be measured?
Your splashback should be templated after the worktops, units and hob are installed and any electrical work is finished. The glass is made to the exact finished dimensions, including socket positions, so measuring from plans or before worktops go in often leads to panels that do not fit and have to be remade.
Which parts of Fife do you cover for glass splashbacks?
We cover the whole of Fife, including Dunfermline, Kirkcaldy, Glenrothes, St Andrews and Rosyth, and postcode areas DD, KY. Building rules for glass splashbacks here follow the regulations for Scotland. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Fife
- Replacement Glass in Fife
- Misted Glass Repair in Fife
- Emergency Glazing in Fife
- Safety Glass in Fife
- Window Repairs in Fife
- Window Film in Fife
- uPVC Windows in Fife
- Aluminium Windows in Fife
- Sash Windows in Fife
- Composite Doors in Fife
- Bifold Doors in Fife
- Sliding Doors in Fife
- Secondary Glazing in Fife
- Roof Lanterns in Fife
- Glass Balustrades in Fife
- Frameless Glass in Fife
- Shower Screens in Fife
- Bespoke Mirrors in Fife
- Glass Roofs in Fife
- Shopfront Glazing in Fife
- Curtain Walling in Fife
- Glass Partitions in Fife
- Property Glazing in Fife
Get a written quote in Fife
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.