Herefordshire · England
Glass Splashbacks in Herefordshire
Looking for a glass splashback in Herefordshire? Our glaziers can template your finished kitchen and quote for toughened, back-painted glass made with every socket cut-out in place.
- Guide from £225
- 4 towns covered
- Postcode areas HR, WR
Kitchen glass splashback for homes and businesses in Herefordshire
Hob makers set minimum clearances between the hob and nearby wall surfaces, and gas hobs in particular can have specific requirements. We check your hob's installation instructions before ordering so the glass, its cut-outs and any joints sit where the manufacturer allows.
The price depends on the total glass area, the number of panels and joints, the number of cut-outs, the colour and glass type, and access to the wall. Low-iron glass, metallic or printed finishes and complex shapes add cost. See the guide prices for typical ranges.
Long runs and tall walls are usually made from more than one panel, because large sheets are heavy and hard to carry through houses. Joints are planned at corners, behind the hob centre line or at natural breaks, and are finished with a thin, neat silicone line.
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on colour and finish. Fitting a typical kitchen takes part of a day, and the kitchen can normally be used again straight afterwards, though the silicone needs time to cure fully.
Towns we cover for glass splashbacks in Herefordshire
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Herefordshire
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Parts of Herefordshire are within about 16 km of the coast, where exposure to wind and salt air is worth planning for. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Older rural homes often have uneven solid walls with lime plaster or stone, so the wall may need making flat before glass can be bonded. Where a range cooker is fitted, its heat and clearance needs are checked before ordering.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Printed design
A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.
Clear glass panel
Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Satin finish
Acid-etched glass with a soft, low-sheen face that reduces reflections and glare, useful opposite windows or bright lighting.
Glass Splashbacks in Herefordshire: questions
How long does it take to get a glass splashback fitted?
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on the colour and finish. Fitting a typical kitchen takes part of a day, and you can normally use the kitchen again once we have finished. The silicone needs time to cure fully, and we tell you how long on the day.
How do you match the colour of a glass splashback?
We can match many paint and RAL colours, and the most reliable way to choose is from a physical glass sample viewed in your own kitchen. Colours look different on screens and under different lighting. For pale colours we usually suggest low-iron glass, because standard glass adds a green tint to the painted back.
How do I clean a glass splashback?
Wipe it with a soft cloth and warm soapy water, or a non-abrasive glass cleaner, then buff dry for a streak-free finish. Grease behind the hob comes off easily because there are no grout lines. Avoid scourers, abrasive creams and blades, which can scratch the glass, and do not use cleaners that could seep behind the edges.
Can I fit a glass splashback myself?
It is possible, but the risks are mostly in measuring and handling. A small error in templating or a socket position means the toughened panel has to be remade, because it cannot be trimmed. Large panels are heavy and awkward to place without damaging worktops, and the adhesive must suit the painted back. We measure, make and fit as one job.
Which parts of Herefordshire do you cover for glass splashbacks?
We cover the whole of Herefordshire, including Hereford, Leominster, Ross-on-Wye and Ledbury, and postcode areas HR, WR. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Herefordshire
- Replacement Glass in Herefordshire
- Misted Glass Repair in Herefordshire
- Emergency Glazing in Herefordshire
- Safety Glass in Herefordshire
- Window Repairs in Herefordshire
- Window Film in Herefordshire
- uPVC Windows in Herefordshire
- Aluminium Windows in Herefordshire
- Sash Windows in Herefordshire
- Composite Doors in Herefordshire
- Bifold Doors in Herefordshire
- Sliding Doors in Herefordshire
- Secondary Glazing in Herefordshire
- Roof Lanterns in Herefordshire
- Glass Balustrades in Herefordshire
- Frameless Glass in Herefordshire
- Shower Screens in Herefordshire
- Bespoke Mirrors in Herefordshire
- Glass Roofs in Herefordshire
- Shopfront Glazing in Herefordshire
- Curtain Walling in Herefordshire
- Glass Partitions in Herefordshire
- Property Glazing in Herefordshire
All glazing in Herefordshire · Glass Splashbacks across the UK
Get a written quote in Herefordshire
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.