Mid Glamorgan · Wales
Glass Splashbacks in Mid Glamorgan
Looking for a glass splashback in Mid Glamorgan? Our glaziers can template your finished kitchen and quote for toughened, back-painted glass made with every socket cut-out in place.
- Guide from £225
- 16 towns covered
- Postcode areas CF
Kitchen glass splashback in Mid Glamorgan
The wall behind a splashback must be flat, sound and dry so the adhesive bonds evenly. Old tiles are usually removed and the wall made good, because uneven surfaces show through the glass and can create stress points behind the panel.
Splashbacks are made from toughened glass because it copes with heat from a hob and with the stress around socket cut-outs far better than ordinary glass. Untoughened coloured glass is more prone to cracking behind a hob or across a cut-out, so we only fit toughened panels.
Long runs and tall walls are usually made from more than one panel, because large sheets are heavy and hard to carry through houses. Joints are planned at corners, behind the hob centre line or at natural breaks, and are finished with a thin, neat silicone line.
Toughened glass cannot be cut or drilled after toughening, so every socket, switch, extractor and window-reveal cut-out is made beforehand. Sockets cannot be moved after the glass is ordered without remaking the panel, so electrical positions need to be final at templating.
Towns we cover for glass splashbacks in Mid Glamorgan
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Mid Glamorgan
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Mid Glamorgan has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Older rural homes often have uneven solid walls with lime plaster or stone, so the wall may need making flat before glass can be bonded. Where a range cooker is fitted, its heat and clearance needs are checked before ordering.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Clear glass panel
Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Printed design
A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.
Low-iron glass
Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.
Glass Splashbacks in Mid Glamorgan: questions
How do you match the colour of a glass splashback?
We can match many paint and RAL colours, and the most reliable way to choose is from a physical glass sample viewed in your own kitchen. Colours look different on screens and under different lighting. For pale colours we usually suggest low-iron glass, because standard glass adds a green tint to the painted back.
What affects the cost of a glass splashback?
The main cost drivers are the total glass area, the number of panels and joints, the number of socket and switch cut-outs, the colour and glass type, and how easy the wall is to reach. Low-iron glass, metallic or printed finishes and shaped panels add cost. See the guide prices for typical ranges.
Why does my white glass splashback look slightly green?
Standard glass contains iron, which gives it a green tint that shows through pale back-painted colours, particularly white and cream. Low-iron glass has much less iron, so the colour behind looks close to the painted sample. If you are choosing a light colour, it is worth specifying low-iron glass from the start.
How long does it take to get a glass splashback fitted?
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on the colour and finish. Fitting a typical kitchen takes part of a day, and you can normally use the kitchen again once we have finished. The silicone needs time to cure fully, and we tell you how long on the day.
Which parts of Mid Glamorgan do you cover for glass splashbacks?
We cover the whole of Mid Glamorgan, including Rhondda, Tonypandy, Bridgend, Merthyr Tydfil and Pontypridd, and postcode areas CF. Building rules for glass splashbacks here follow the regulations for Wales. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Mid Glamorgan
- Replacement Glass in Mid Glamorgan
- Misted Glass Repair in Mid Glamorgan
- Emergency Glazing in Mid Glamorgan
- Safety Glass in Mid Glamorgan
- Window Repairs in Mid Glamorgan
- Window Film in Mid Glamorgan
- uPVC Windows in Mid Glamorgan
- Aluminium Windows in Mid Glamorgan
- Sash Windows in Mid Glamorgan
- Composite Doors in Mid Glamorgan
- Bifold Doors in Mid Glamorgan
- Sliding Doors in Mid Glamorgan
- Secondary Glazing in Mid Glamorgan
- Roof Lanterns in Mid Glamorgan
- Glass Balustrades in Mid Glamorgan
- Frameless Glass in Mid Glamorgan
- Shower Screens in Mid Glamorgan
- Bespoke Mirrors in Mid Glamorgan
- Glass Roofs in Mid Glamorgan
- Shopfront Glazing in Mid Glamorgan
- Curtain Walling in Mid Glamorgan
- Glass Partitions in Mid Glamorgan
- Property Glazing in Mid Glamorgan
All glazing in Mid Glamorgan · Glass Splashbacks across the UK
Get a written quote in Mid Glamorgan
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.