Sittingbourne · Kent
Property Glazing in Sittingbourne
Landlords in Sittingbourne can get void property glazing, lock and window repairs completed and documented so homes are ready for the next tenancy.
- ME9
- ME10
- ME12
- Guide from £165
About glazing contractor for letting agents in Sittingbourne
In England, landlords of most residential tenancies have a duty under section 11 of the Landlord and Tenant Act 1985 to keep the structure and exterior in repair. Damage caused by a tenant is usually handled differently, and tenancy terms set out who pays.
The Housing Health and Safety Rating System is used by councils in England to assess hazards in homes. Its hazards include collision and entrapment, which covers glazing, falls between levels, which covers windows, and entry by intruders. Broken glass and faulty window locks can fall under these headings.
Every job gets its own written quote that fixes the price for the specification shown. The quote can carry your purchase order or job reference, so it matches your system. Work beyond the quote, such as extra panes found on site, is quoted separately before it goes ahead.
For workplaces, communal areas and offices, the Workplace (Health, Safety and Welfare) Regulations require windows, glazed doors and transparent partitions to be of safety material or protected against breakage where needed for health or safety, and to be marked so they are apparent.
What a typical job includes
- One point of contact for all glazing jobs
- Make-safe boarding and permanent glass where needed
- Written quote per job with your reference
- Invoice matching the approved quote
Working in Sittingbourne
- Postcodes covered
- ME9, ME10, ME12 and the surrounding area, including Faversham, Gillingham and Chatham
- Coast
- Sittingbourne sits roughly 6 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. Coastal portfolios see more salt corrosion on window hardware and more strain on seals from wind-driven rain. Planned checks on hinges, locks and sealed units help spot problems early, especially in seafront flats and holiday lets.
- Daylight and sun
- In Sittingbourne the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South and west-facing flats can overheat and suffer glare, which tenants often report. Solar control glass or film is an option on replacement, and checking for condensation on north-facing windows helps spot ventilation issues in colder months.
- Access and setting
- Rural portfolios can spread across a wide area, so grouping jobs and planned surveys saves visits. Older cottages often have timber windows and non-standard glass sizes, which the glazier measures carefully before ordering replacements.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Sittingbourne
| Typical job | Guide price inc VAT |
|---|---|
| Replace a standard sealed unit | £165 – £205 |
| Toughened door unit | £345 – £435 |
| Board up, then glaze (one window) | £315 – £405 |
Get a guide price for your size
Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Specification choices
Make-safe and boarding
Loose glass removed and openings boarded or temporarily glazed, followed by permanent glass on a second visit.
Reactive repairs
Broken, cracked or misted glass and faulty windows or doors repaired as jobs are raised, with a written quote for each job.
Safety glass upgrades
Replacing unmarked glass in doors, side panels and low-level panes with toughened or laminated safety glass.
Property Glazing in Sittingbourne: questions
Can you help with void properties between tenancies?
Yes. Between tenancies, a glazier can check and repair broken or misted glass, replace damaged locks and cylinders, fix hinges and handles, and fit restrictors where needed. The work is reported with photos, giving a clear record of the property's glazing condition at the start of the next tenancy.
Can you arrange access with our tenants directly?
Yes, if you authorise it. We contact the tenant to arrange a suitable time, confirm the appointment in writing and keep you updated. If access is refused or the tenant is not in, we report back with the dates and times of each attempt, so you have a clear record for your property file.
Do replacement panes in rented homes need to be safety glass?
They do if they are in critical locations. In England, Approved Document K covers glass in doors and within 300mm of a door edge, up to 1500mm above the floor, and other glass within 800mm of the floor. Upgrading old unmarked glass in these places reduces risk, and the rules differ in detail between UK nations.
Do you provide a quote for each job before work starts?
Yes. Every job gets a written quote that fixes the price for the specification shown, carrying your reference if you give one. For make-safe work, we confirm the boarding cost before or at the visit, then quote for the permanent glass. Any extra work found on site is quoted separately and only done once approved.
Do you cover Sittingbourne for property glazing?
Yes. We can quote for property glazing across Sittingbourne and the surrounding Kent area, including postcode districts ME9, ME10 and ME12, and nearby Faversham, Gillingham and Chatham. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Sittingbourne
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.