County Antrim · Northern Ireland

Replacement Glass in County Antrim

Our glaziers cover County Antrim for replacement glass in doors, windows and screens, including toughened and laminated safety glass where it is required.

Guide from £135
9 towns covered
Postcode areas BT

Double glazing glass replacement in County Antrim

Older sealed units often have plain float glass on both sides. A replacement unit can use a low-emissivity coated pane and a gas-filled cavity, which reduces heat loss through the glass without changing the frame. The coating faces into the cavity and is not noticeable in normal use.

Fitting a replacement unit is usually a short visit per window once the glass has been made. The beads are eased out, the old unit lifted out, the rebate cleaned, and the new unit set on glazing packers to support its weight and keep any opening sash square before the beads go back.

Safety glass should carry a permanent mark, usually etched in one corner, that stays visible once the glass is fitted. The mark identifies the maker or supplier and the standard it meets, such as BS EN 12150 for toughened glass or a BS EN 12600 impact class.

Units with Georgian bars or leaded designs can be remade to match the originals. The glazier notes the bar width, colour and layout, or the lead pattern, so the new unit lines up with neighbouring windows. Bars fitted inside the cavity are protected from dirt and need no separate cleaning.

Glazier fitting a new double glazed unit into a white window frame

Towns we cover for replacement glass in County Antrim

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in County Antrim

Technical Booklet V covers safety glazing in Northern Ireland, including glass in and around doors and low-level glazing where people could walk into it.

Listed buildings in Northern Ireland need listed building consent for most changes to historic windows.

County Antrim has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Near the coast, salt air and wind-driven rain test the seals around replacement glass. Good bedding, correct packers and sound beads matter more, and stainless or coated fixings resist corrosion. Exposed panes may also need thicker glass to cope with wind load.

In towns and cities, replacing glass in flats or above shops often means planning parking, stair access and lifting large units safely. Laminated glass suits ground-floor windows, acoustic glass helps on busy roads, and conservation areas may need matching patterns.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical job	Guide price inc VAT
Small double glazed unit, 500 × 700 mm	£135 – £175
Standard unit, 600 × 900 mm	£165 – £205
Large unit, 1200 × 1200 mm	£285 – £365
Toughened unit for a door, 750 × 1800 mm	£345 – £435
Triple glazed unit, 600 × 900 mm	£235 – £305

Choosing your replacement glass

Standard double glazed unit

Two panes of float glass with a sealed cavity, suitable where safety glass is not required and no special performance is needed.

Obscure patterned glass

Textured glass for bathrooms, hallways and doors, available in several patterns that give different levels of privacy.

Laminated glass

Two sheets of glass bonded to an interlayer that holds the pieces in place if it breaks, adding safety and security.

Triple glazed unit

Three panes and two cavities for extra insulation, where the frame's rebate is deep enough to take the thicker unit.

Replacement Glass in County Antrim: questions

Should I upgrade to low-E glass when replacing a unit?

If the existing unit is plain float glass, a low-emissivity unit is worth considering because it reduces heat loss through the glass and keeps the inner pane warmer, which can reduce condensation on the room side. It fits the same frame, provided the overall thickness matches. The quote can show standard and low-E options side by side.

Can I replace a sealed unit myself?

Single panes in simple frames are sometimes replaced by confident DIYers, but sealed units and safety glass carry risks. A unit that is not packed correctly can make an opening sash drop or crack under load, and handling large panes is hazardous. A glazier also checks whether safety glass is required and that the new glass carries the correct marking.

What is the difference between toughened and laminated replacement glass?

Toughened glass is heat treated so that, if it breaks, it crumbles into small, relatively blunt pieces and leaves the opening empty. Laminated glass has a plastic interlayer between two sheets that holds the pieces together, so the pane stays in the frame. Both count as safety glass when classified to the relevant standard, and laminated also helps with security and noise.

What guarantee comes with replacement glass?

Manufacturer guarantees apply to new sealed units and glass, and the terms are confirmed in writing. Guarantee terms for the fitting are set out in writing with your quote. Keep the paperwork with your property records, as it identifies the unit and its specification if anything needs to be checked or claimed later.

Which parts of County Antrim do you cover for replacement glass?

We cover the whole of County Antrim, including Belfast, Lisburn, Newtownabbey, Carrickfergus and Ballymena, and postcode areas BT. Building rules for replacement glass here follow the regulations for Northern Ireland. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Other glazing services in County Antrim

All glazing in County Antrim · Replacement Glass & Sealed Units across the UK

Get a written quote in County Antrim

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

Get a guide price 0800 088 6248 WhatsApp