Exeter · Devon
Replacement Glass in Exeter
Need new glass for a window or door in Exeter? We cover replacement sealed units, safety glass and obscure glass for existing uPVC, aluminium and timber frames.
- EX1
- EX2
- EX3
- EX4
- Guide from £135
Glass replacement for windows for homes and businesses in Exeter
Sealed units are made to measure, so the glazier records the width, height and overall thickness of the existing unit rather than the frame opening. The new unit has to match that thickness to sit correctly in the rebate and take the original beads, otherwise the seal and security of the pane suffer.
Older sealed units often have plain float glass on both sides. A replacement unit can use a low-emissivity coated pane and a gas-filled cavity, which reduces heat loss through the glass without changing the frame. The coating faces into the cavity and is not noticeable in normal use.
Swapping glass in an existing frame is normally treated as a repair rather than notifiable building work in England. Replacing the whole frame and opening parts is different and usually needs to be notified, either through building control or a competent person scheme such as FENSA or Certass.
In England, Approved Document K treats glass in a door or within 300mm of a door edge, up to 1500mm above the floor, and any other glass within 800mm of the floor as critical locations. Replacement glass in these areas should be safety glass, even where the old pane was not.
What a typical job includes
- Written quote fixing the price for the specification
- Fitting on glazing packers with the beads refitted
- Made-to-measure glass or sealed unit to suit the frame
- Survey and measurement of the existing glass or unit
Working in Exeter
- Postcodes covered
- EX1, EX2, EX3, EX4 and the surrounding area, including Exmouth, Tiverton and Newton Abbot
- Coast
- Exeter is about 6 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt air and wind-driven rain test the seals around replacement glass. Good bedding, correct packers and sound beads matter more, and stainless or coated fixings resist corrosion. Exposed panes may also need thicker glass to cope with wind load.
- Daylight and sun
- In Exeter the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 63° and 16.3 hours in midsummer. On south and west elevations, a solar control or low-E coating changes how much heat and glare new glass lets in. North-facing rooms usually benefit more from glass that keeps heat in while admitting as much daylight as possible.
- Access and setting
- In towns and cities, replacing glass in flats or above shops often means planning parking, stair access and lifting large units safely. Laminated glass suits ground-floor windows, acoustic glass helps on busy roads, and conservation areas may need matching patterns.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Exeter
| Typical job | Guide price inc VAT |
|---|---|
| Small double glazed unit, 500 × 700 mm | £135 – £175 |
| Standard unit, 600 × 900 mm | £165 – £205 |
| Large unit, 1200 × 1200 mm | £285 – £365 |
| Toughened unit for a door, 750 × 1800 mm | £345 – £435 |
| Triple glazed unit, 600 × 900 mm | £235 – £305 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
Specification choices
Standard double glazed unit
Two panes of float glass with a sealed cavity, suitable where safety glass is not required and no special performance is needed.
Toughened safety glass
Heat-treated glass that breaks into small, relatively blunt pieces, used in doors, low-level panes and other critical locations.
Low-E energy unit
A coated pane and gas-filled cavity that reduce heat loss through the glass compared with older plain float glass units.
Replacement Glass in Exeter: questions
How long does it take to get replacement glass fitted?
There are usually two stages: a survey to measure, then a fitting visit once the glass has been made. Toughened glass and sealed units are manufactured to order, so they cannot be cut from stock while the glazier waits. Fitting itself usually takes a short time per window. Your quote will set out when the glass is expected, and we will tell you honestly when a glazier can attend.
Can you replace just the glass without changing the window frame?
Yes. In most uPVC, aluminium and timber windows the glass or sealed unit can be removed and replaced on its own, keeping the existing frame, hinges and locks. The glazier checks the frame is in good condition first. If the frame is rotten, warped or damaged, the quote will say so, so you can decide whether glass only is still worth doing.
Can I replace a sealed unit myself?
Single panes in simple frames are sometimes replaced by confident DIYers, but sealed units and safety glass carry risks. A unit that is not packed correctly can make an opening sash drop or crack under load, and handling large panes is hazardous. A glazier also checks whether safety glass is required and that the new glass carries the correct marking.
Should I upgrade to low-E glass when replacing a unit?
If the existing unit is plain float glass, a low-emissivity unit is worth considering because it reduces heat loss through the glass and keeps the inner pane warmer, which can reduce condensation on the room side. It fits the same frame, provided the overall thickness matches. The quote can show standard and low-E options side by side.
Do you cover Exeter for replacement glass?
Yes. We can quote for replacement glass across Exeter and the surrounding Devon area, including postcode districts EX1, EX2, EX3 and EX4, and nearby Exmouth, Tiverton and Newton Abbot. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Exeter
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.