Call 0800 088 6248

Basildon · Essex

Replacement Glass in Basildon

Cracked or broken glass in Basildon can usually be replaced without changing the frame, and our glaziers can quote for single panes and sealed units.

  • SS13
  • SS14
  • SS15
  • SS16
  • Guide from £135

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Replacement sealed units for homes and businesses in Basildon

Safety glass should carry a permanent mark, usually etched in one corner, that stays visible once the glass is fitted. The mark identifies the maker or supplier and the standard it meets, such as BS EN 12150 for toughened glass or a BS EN 12600 impact class.

Older sealed units often have plain float glass on both sides. A replacement unit can use a low-emissivity coated pane and a gas-filled cavity, which reduces heat loss through the glass without changing the frame. The coating faces into the cavity and is not noticeable in normal use.

Many modern windows are internally beaded, which makes it harder to remove glass from outside. If your windows have external beads, ask about security glazing tape or clips when the glass is replaced, as these make it more difficult for beads to be prised off from outside.

Swapping glass in an existing frame is normally treated as a repair rather than notifiable building work in England. Replacing the whole frame and opening parts is different and usually needs to be notified, either through building control or a competent person scheme such as FENSA or Certass.

What's included

  • Made-to-measure glass or sealed unit to suit the frame
  • Removal of old glass and packaging from site
  • Survey and measurement of the existing glass or unit
  • Written quote fixing the price for the specification
Glazier fitting a new double glazed unit into a white window frame

About Basildon for this job

Postcodes covered
SS13, SS14, SS15, SS16 and the surrounding area, including Pitsea, Stanford-le-Hope and Wickford
Coast
Basildon sits roughly 7 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. Near the coast, salt air and wind-driven rain test the seals around replacement glass. Good bedding, correct packers and sound beads matter more, and stainless or coated fixings resist corrosion. Exposed panes may also need thicker glass to cope with wind load.
Daylight and sun
In Basildon the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. On south and west elevations, a solar control or low-E coating changes how much heat and glare new glass lets in. North-facing rooms usually benefit more from glass that keeps heat in while admitting as much daylight as possible.
Access and setting
In towns and cities, replacing glass in flats or above shops often means planning parking, stair access and lifting large units safely. Laminated glass suits ground-floor windows, acoustic glass helps on busy roads, and conservation areas may need matching patterns.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Basildon

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Small double glazed unit, 500 × 700 mm£135 – £175
Standard unit, 600 × 900 mm£165 – £205
Large unit, 1200 × 1200 mm£285 – £365
Toughened unit for a door, 750 × 1800 mm£345 – £435
Triple glazed unit, 600 × 900 mm£235 – £305

Get a guide price for your size

Listed buildings in England need listed building consent for most changes to historic windows or glass, and conservation areas can restrict changes visible from the street. Speak to the council's conservation officer before ordering.

Specification choices

Acoustic laminated glass

Laminated glass with a sound-dampening interlayer, often combined with unequal pane thicknesses to reduce traffic and street noise.

Obscure patterned glass

Textured glass for bathrooms, hallways and doors, available in several patterns that give different levels of privacy.

Georgian bar or leaded unit

Decorative bars or lead designs inside or on the glass, matched to existing windows for a consistent look across the property.

Replacement Glass in Basildon: questions

What is the difference between toughened and laminated replacement glass?

Toughened glass is heat treated so that, if it breaks, it crumbles into small, relatively blunt pieces and leaves the opening empty. Laminated glass has a plastic interlayer between two sheets that holds the pieces together, so the pane stays in the frame. Both count as safety glass when classified to the relevant standard, and laminated also helps with security and noise.

Can I replace a sealed unit myself?

Single panes in simple frames are sometimes replaced by confident DIYers, but sealed units and safety glass carry risks. A unit that is not packed correctly can make an opening sash drop or crack under load, and handling large panes is hazardous. A glazier also checks whether safety glass is required and that the new glass carries the correct marking.

Can you match obscure glass to my other windows?

Usually, yes. Obscure glass is made in many patterns, and the glazier can often identify yours from a photo or at the survey. Some older patterns are no longer made. If yours has been discontinued, the quote will offer the closest current pattern, or you can replace a matching set of panes so they all look the same.

Do I need safety glass in my replacement window?

You do if the glass is in a critical location. In England, that means glass in doors and within 300mm of a door edge, up to 1500mm above floor level, and other glass within 800mm of the floor. Elsewhere in the UK the rules are similar, but the detail differs between nations. The glazier checks each location at the survey.

Do you cover Basildon for replacement glass?

Yes. We can quote for replacement glass across Basildon and the surrounding Essex area, including postcode districts SS13, SS14, SS15 and SS16, and nearby Pitsea, Stanford-le-Hope and Wickford. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Basildon

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote