Andover · Hampshire
Replacement Glass in Andover
Cracked or broken glass in Andover can usually be replaced without changing the frame, and our glaziers can quote for single panes and sealed units.
- SP10
- Guide from £135
About replacement window glass in Andover
Sealed units are made to measure, so the glazier records the width, height and overall thickness of the existing unit rather than the frame opening. The new unit has to match that thickness to sit correctly in the rebate and take the original beads, otherwise the seal and security of the pane suffer.
Older sealed units often have plain float glass on both sides. A replacement unit can use a low-emissivity coated pane and a gas-filled cavity, which reduces heat loss through the glass without changing the frame. The coating faces into the cavity and is not noticeable in normal use.
Before replacing glass, the glazier checks the frame for rot, cracks, failed hinges and worn seals. If the frame itself is failing, new glass may not be good value, and the quote will say so, so you can decide between glass only, repairs to the frame or a new window.
Swapping glass in an existing frame is normally treated as a repair rather than notifiable building work in England. Replacing the whole frame and opening parts is different and usually needs to be notified, either through building control or a competent person scheme such as FENSA or Certass.
What's included
- Survey and measurement of the existing glass or unit
- Written quote fixing the price for the specification
- Made-to-measure glass or sealed unit to suit the frame
- Removal of old glass and packaging from site
Local details for Andover
- Postcodes covered
- SP10 and the surrounding area, including Winchester, Newbury and Salisbury
- Coast
- Andover is well inland, around 35 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Andover the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. On south and west elevations, a solar control or low-E coating changes how much heat and glare new glass lets in. North-facing rooms usually benefit more from glass that keeps heat in while admitting as much daylight as possible.
- Access and setting
- Older rural properties often have timber frames, small panes or leaded lights that need careful measuring and hand-made units. Panes in exposed spots may need thicker glass, and the survey confirms every detail so the fitting visit runs smoothly.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Andover
| Typical job | Guide price inc VAT |
|---|---|
| Small double glazed unit, 500 × 700 mm | £135 – £175 |
| Standard unit, 600 × 900 mm | £165 – £205 |
| Large unit, 1200 × 1200 mm | £285 – £365 |
| Toughened unit for a door, 750 × 1800 mm | £345 – £435 |
| Triple glazed unit, 600 × 900 mm | £235 – £305 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
Specification choices
Obscure patterned glass
Textured glass for bathrooms, hallways and doors, available in several patterns that give different levels of privacy.
Low-E energy unit
A coated pane and gas-filled cavity that reduce heat loss through the glass compared with older plain float glass units.
Laminated glass
Two sheets of glass bonded to an interlayer that holds the pieces in place if it breaks, adding safety and security.
Replacement Glass in Andover: questions
Can you replace just the glass without changing the window frame?
Yes. In most uPVC, aluminium and timber windows the glass or sealed unit can be removed and replaced on its own, keeping the existing frame, hinges and locks. The glazier checks the frame is in good condition first. If the frame is rotten, warped or damaged, the quote will say so, so you can decide whether glass only is still worth doing.
What affects the cost of replacement glass?
The main factors are the size of the pane, the glass type and thickness, and whether it is a single pane or a sealed unit. Toughened, laminated, acoustic and decorative units cost more than standard float glass. Access also matters, as upper-floor or awkward panes take longer to fit safely. See the guide prices for typical sizes, then get a written quote for your exact job.
Should I upgrade to low-E glass when replacing a unit?
If the existing unit is plain float glass, a low-emissivity unit is worth considering because it reduces heat loss through the glass and keeps the inner pane warmer, which can reduce condensation on the room side. It fits the same frame, provided the overall thickness matches. The quote can show standard and low-E options side by side.
Do I need safety glass in my replacement window?
You do if the glass is in a critical location. In England, that means glass in doors and within 300mm of a door edge, up to 1500mm above floor level, and other glass within 800mm of the floor. Elsewhere in the UK the rules are similar, but the detail differs between nations. The glazier checks each location at the survey.
Do you cover Andover for replacement glass?
Yes. We can quote for replacement glass across Andover and the surrounding Hampshire area, including postcode districts SP10, and nearby Winchester, Newbury and Salisbury. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Andover
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.