Call 0800 088 6248

Portishead · Somerset

Replacement Glass in Portishead

Cracked or broken glass in Portishead can usually be replaced without changing the frame, and our glaziers can quote for single panes and sealed units.

  • BS20
  • Guide from £135

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Replacement sealed units for homes and businesses in Portishead

When a double glazed unit sits in a critical location, both panes need to be safety glass, not just the one facing the room. A unit with toughened glass on one side and ordinary float glass on the other does not give safe breakage from both directions.

In England, Approved Document K treats glass in a door or within 300mm of a door edge, up to 1500mm above the floor, and any other glass within 800mm of the floor as critical locations. Replacement glass in these areas should be safety glass, even where the old pane was not.

Fitting a replacement unit is usually a short visit per window once the glass has been made. The beads are eased out, the old unit lifted out, the rebate cleaned, and the new unit set on glazing packers to support its weight and keep any opening sash square before the beads go back.

Older sealed units often have plain float glass on both sides. A replacement unit can use a low-emissivity coated pane and a gas-filled cavity, which reduces heat loss through the glass without changing the frame. The coating faces into the cavity and is not noticeable in normal use.

Included as standard

  • Removal of old glass and packaging from site
  • Written quote fixing the price for the specification
  • Fitting on glazing packers with the beads refitted
  • Survey and measurement of the existing glass or unit
Glazier fitting a new double glazed unit into a white window frame

Local details for Portishead

Postcodes covered
BS20 and the surrounding area, including Nailsea, Clevedon and Caldicot
Coast
Portishead is about 2 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt air and wind-driven rain test the seals around replacement glass. Good bedding, correct packers and sound beads matter more, and stainless or coated fixings resist corrosion. Exposed panes may also need thicker glass to cope with wind load.
Daylight and sun
In Portishead the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. On south and west elevations, a solar control or low-E coating changes how much heat and glare new glass lets in. North-facing rooms usually benefit more from glass that keeps heat in while admitting as much daylight as possible.
Access and setting
Older rural properties often have timber frames, small panes or leaded lights that need careful measuring and hand-made units. Panes in exposed spots may need thicker glass, and the survey confirms every detail so the fitting visit runs smoothly.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Portishead

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Small double glazed unit, 500 × 700 mm£135 – £175
Standard unit, 600 × 900 mm£165 – £205
Large unit, 1200 × 1200 mm£285 – £365
Toughened unit for a door, 750 × 1800 mm£345 – £435
Triple glazed unit, 600 × 900 mm£235 – £305

Get a guide price for your size

Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.

Specification choices

Low-E energy unit

A coated pane and gas-filled cavity that reduce heat loss through the glass compared with older plain float glass units.

Georgian bar or leaded unit

Decorative bars or lead designs inside or on the glass, matched to existing windows for a consistent look across the property.

Standard double glazed unit

Two panes of float glass with a sealed cavity, suitable where safety glass is not required and no special performance is needed.

Replacement Glass in Portishead: questions

Can you match obscure glass to my other windows?

Usually, yes. Obscure glass is made in many patterns, and the glazier can often identify yours from a photo or at the survey. Some older patterns are no longer made. If yours has been discontinued, the quote will offer the closest current pattern, or you can replace a matching set of panes so they all look the same.

What guarantee comes with replacement glass?

Manufacturer guarantees apply to new sealed units and glass, and the terms are confirmed in writing. Guarantee terms for the fitting are set out in writing with your quote. Keep the paperwork with your property records, as it identifies the unit and its specification if anything needs to be checked or claimed later.

What is the difference between toughened and laminated replacement glass?

Toughened glass is heat treated so that, if it breaks, it crumbles into small, relatively blunt pieces and leaves the opening empty. Laminated glass has a plastic interlayer between two sheets that holds the pieces together, so the pane stays in the frame. Both count as safety glass when classified to the relevant standard, and laminated also helps with security and noise.

How long does it take to get replacement glass fitted?

There are usually two stages: a survey to measure, then a fitting visit once the glass has been made. Toughened glass and sealed units are manufactured to order, so they cannot be cut from stock while the glazier waits. Fitting itself usually takes a short time per window. Your quote will set out when the glass is expected, and we will tell you honestly when a glazier can attend.

Do you cover Portishead for replacement glass?

Yes. We can quote for replacement glass across Portishead and the surrounding Somerset area, including postcode districts BS20, and nearby Nailsea, Clevedon and Caldicot. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Portishead

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote