Taunton · Somerset
Replacement Glass in Taunton
Need new glass for a window or door in Taunton? We cover replacement sealed units, safety glass and obscure glass for existing uPVC, aluminium and timber frames.
- TA1
- Guide from £135
About broken window glass repair in Taunton
Units with Georgian bars or leaded designs can be remade to match the originals. The glazier notes the bar width, colour and layout, or the lead pattern, so the new unit lines up with neighbouring windows. Bars fitted inside the cavity are protected from dirt and need no separate cleaning.
When a double glazed unit sits in a critical location, both panes need to be safety glass, not just the one facing the room. A unit with toughened glass on one side and ordinary float glass on the other does not give safe breakage from both directions.
In England, Approved Document K treats glass in a door or within 300mm of a door edge, up to 1500mm above the floor, and any other glass within 800mm of the floor as critical locations. Replacement glass in these areas should be safety glass, even where the old pane was not.
Older sealed units often have plain float glass on both sides. A replacement unit can use a low-emissivity coated pane and a gas-filled cavity, which reduces heat loss through the glass without changing the frame. The coating faces into the cavity and is not noticeable in normal use.
What you get
- Removal of the old pane and cleaning of the rebate
- Removal of old glass and packaging from site
- Survey and measurement of the existing glass or unit
- Made-to-measure glass or sealed unit to suit the frame
Working in Taunton
- Postcodes covered
- TA1 and the surrounding area, including Bridgwater, Chard and Burnham-on-Sea
- Coast
- Taunton is well inland, around 22 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Taunton the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 62° and 16.3 hours in midsummer. On south and west elevations, a solar control or low-E coating changes how much heat and glare new glass lets in. North-facing rooms usually benefit more from glass that keeps heat in while admitting as much daylight as possible.
- Access and setting
- In towns and cities, replacing glass in flats or above shops often means planning parking, stair access and lifting large units safely. Laminated glass suits ground-floor windows, acoustic glass helps on busy roads, and conservation areas may need matching patterns.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Taunton
| Typical job | Guide price inc VAT |
|---|---|
| Small double glazed unit, 500 × 700 mm | £135 – £175 |
| Standard unit, 600 × 900 mm | £165 – £205 |
| Large unit, 1200 × 1200 mm | £285 – £365 |
| Toughened unit for a door, 750 × 1800 mm | £345 – £435 |
| Triple glazed unit, 600 × 900 mm | £235 – £305 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
What you can choose
Low-E energy unit
A coated pane and gas-filled cavity that reduce heat loss through the glass compared with older plain float glass units.
Toughened safety glass
Heat-treated glass that breaks into small, relatively blunt pieces, used in doors, low-level panes and other critical locations.
Triple glazed unit
Three panes and two cavities for extra insulation, where the frame's rebate is deep enough to take the thicker unit.
Replacement Glass in Taunton: questions
Does replacing window glass need building regulations approval?
Replacing only the glass in an existing frame is normally treated as a repair in England and does not need to be notified. Replacing the whole window is different and must go through building control or a competent person scheme. Even for glass-only work, safety glass should be used in critical locations, and the detail of the rules differs between UK nations.
Can I replace a sealed unit myself?
Single panes in simple frames are sometimes replaced by confident DIYers, but sealed units and safety glass carry risks. A unit that is not packed correctly can make an opening sash drop or crack under load, and handling large panes is hazardous. A glazier also checks whether safety glass is required and that the new glass carries the correct marking.
How long does it take to get replacement glass fitted?
There are usually two stages: a survey to measure, then a fitting visit once the glass has been made. Toughened glass and sealed units are manufactured to order, so they cannot be cut from stock while the glazier waits. Fitting itself usually takes a short time per window. Your quote will set out when the glass is expected, and we will tell you honestly when a glazier can attend.
Should I upgrade to low-E glass when replacing a unit?
If the existing unit is plain float glass, a low-emissivity unit is worth considering because it reduces heat loss through the glass and keeps the inner pane warmer, which can reduce condensation on the room side. It fits the same frame, provided the overall thickness matches. The quote can show standard and low-E options side by side.
Do you cover Taunton for replacement glass?
Yes. We can quote for replacement glass across Taunton and the surrounding Somerset area, including postcode districts TA1, and nearby Bridgwater, Chard and Burnham-on-Sea. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Taunton
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.