Epsom · Surrey
Replacement Glass in Epsom
Our glaziers cover Epsom for replacement glass in doors, windows and screens, including toughened and laminated safety glass where it is required.
- KT17
- KT19
- Guide from £135
About glass replacement for windows in Epsom
Before replacing glass, the glazier checks the frame for rot, cracks, failed hinges and worn seals. If the frame itself is failing, new glass may not be good value, and the quote will say so, so you can decide between glass only, repairs to the frame or a new window.
When a double glazed unit sits in a critical location, both panes need to be safety glass, not just the one facing the room. A unit with toughened glass on one side and ordinary float glass on the other does not give safe breakage from both directions.
In England, Approved Document K treats glass in a door or within 300mm of a door edge, up to 1500mm above the floor, and any other glass within 800mm of the floor as critical locations. Replacement glass in these areas should be safety glass, even where the old pane was not.
The price of replacement glass depends mainly on the size of the pane, the glass type and thickness, whether it is a single pane or sealed unit, special features such as bars or leaded designs, and access. Upper-floor panes that need ladders, towers or extra hands cost more to fit.
Included as standard
- Made-to-measure glass or sealed unit to suit the frame
- Removal of old glass and packaging from site
- Fitting on glazing packers with the beads refitted
- Removal of the old pane and cleaning of the rebate
Epsom at a glance
- Postcodes covered
- KT17, KT19 and the surrounding area, including Ewell, Banstead and Sutton
- Coast
- Epsom is well inland, around 46 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Epsom the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. On south and west elevations, a solar control or low-E coating changes how much heat and glare new glass lets in. North-facing rooms usually benefit more from glass that keeps heat in while admitting as much daylight as possible.
- Access and setting
- Older rural properties often have timber frames, small panes or leaded lights that need careful measuring and hand-made units. Panes in exposed spots may need thicker glass, and the survey confirms every detail so the fitting visit runs smoothly.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Epsom
| Typical job | Guide price inc VAT |
|---|---|
| Small double glazed unit, 500 × 700 mm | £135 – £175 |
| Standard unit, 600 × 900 mm | £165 – £205 |
| Large unit, 1200 × 1200 mm | £285 – £365 |
| Toughened unit for a door, 750 × 1800 mm | £345 – £435 |
| Triple glazed unit, 600 × 900 mm | £235 – £305 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
Choosing your replacement glass
Laminated glass
Two sheets of glass bonded to an interlayer that holds the pieces in place if it breaks, adding safety and security.
Low-E energy unit
A coated pane and gas-filled cavity that reduce heat loss through the glass compared with older plain float glass units.
Acoustic laminated glass
Laminated glass with a sound-dampening interlayer, often combined with unequal pane thicknesses to reduce traffic and street noise.
Replacement Glass in Epsom: questions
What affects the cost of replacement glass?
The main factors are the size of the pane, the glass type and thickness, and whether it is a single pane or a sealed unit. Toughened, laminated, acoustic and decorative units cost more than standard float glass. Access also matters, as upper-floor or awkward panes take longer to fit safely. See the guide prices for typical sizes, then get a written quote for your exact job.
How long does it take to get replacement glass fitted?
There are usually two stages: a survey to measure, then a fitting visit once the glass has been made. Toughened glass and sealed units are manufactured to order, so they cannot be cut from stock while the glazier waits. Fitting itself usually takes a short time per window. Your quote will set out when the glass is expected, and we will tell you honestly when a glazier can attend.
Does replacing window glass need building regulations approval?
Replacing only the glass in an existing frame is normally treated as a repair in England and does not need to be notified. Replacing the whole window is different and must go through building control or a competent person scheme. Even for glass-only work, safety glass should be used in critical locations, and the detail of the rules differs between UK nations.
Should I upgrade to low-E glass when replacing a unit?
If the existing unit is plain float glass, a low-emissivity unit is worth considering because it reduces heat loss through the glass and keeps the inner pane warmer, which can reduce condensation on the room side. It fits the same frame, provided the overall thickness matches. The quote can show standard and low-E options side by side.
Do you cover Epsom for replacement glass?
Yes. We can quote for replacement glass across Epsom and the surrounding Surrey area, including postcode districts KT17 and KT19, and nearby Ewell, Banstead and Sutton. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Epsom
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.