Call 0800 088 6248

Widnes · Cheshire

Roof Lanterns in Widnes

A roof lantern in Widnes can flood a dark extension or kitchen with daylight from above, and our glaziers check the roof and upstand before you receive a fixed written quote.

  • WA8
  • WA7
  • Guide from £1,095

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Flat roof skylight in Widnes: what to know

Old polycarbonate or single glazed roof lanterns can be replaced with double glazed aluminium lanterns on the existing upstand, if the upstand is sound, level and the right size. Upstands that are rotten, uninsulated or out of level should be rebuilt first, which the survey identifies.

The Rooflight Association recommends laminated glass for the inner pane of glass rooflights, because laminated glass stays bonded together if it breaks instead of dropping fragments into the room below. Toughened inner panes are still used, but laminated is the safer choice over kitchens, stairs and seating areas.

A roof lantern is assembled from an aluminium ridge, hip bars and glazing bars that hold sealed glass units on each pitch. It sits on an upstand built around the roof opening. The upstand should be level, weathered into the roof covering and insulated, because a poor upstand causes most leaks and cold spots.

Warm, moist air rises and collects in a roof lantern, so condensation can form on cold winter mornings, especially over kitchens and bathrooms. Thermally broken frames, warm-edge spacers and good room ventilation reduce it, and opening vents in the lantern can release warm air in summer.

Included as standard

  • Sealed double glazed units with laminated inner pane options
  • Survey of the roof, opening, upstand and drainage
  • Fixing, glazing and sealing onto the prepared upstand
  • Removal and disposal of an old lantern or skylight
Roof lantern above a kitchen island in an open-plan extension

Local details for Widnes

Postcodes covered
WA8, WA7 and the surrounding area, including Runcorn, Halewood and Speke
Coast
Widnes is about 2 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Coastal lanterns face salt deposits on the glass and frames and strong uplift from wind on exposed roofs. Marine-grade coatings, stainless fixings and secure fixing to a well-built upstand matter, and salt film may need rinsing more often than self-cleaning glass manages alone.
Daylight and sun
In Widnes the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.2 hours of daylight, rising to about 60° and 16.8 hours in midsummer. Overhead glazing receives far more light than a wall window of the same size, especially when the sun is high in summer. South-facing lanterns may need solar-control glass, while low winter sun and north-facing rooms benefit from clear, high light-transmission low-E glass.
Access and setting
Getting a large lantern onto a terraced flat roof may mean carrying it through the house or lifting it over neighbouring property, so access is planned at survey. Lanterns near a boundary raise fire performance questions, and conservation areas may restrict raised glazing.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Widnes

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Lantern 1500 × 1000 mm, fitted to a kerb£1,395 – £1,795
Lantern 2000 × 1000 mm£1,695 – £2,095
Lantern 3000 × 1500 mm£2,795 – £3,695
Flat glass rooflight 1000 × 1000 mm£1,095 – £1,395

Get a guide price for your size

In England, replacing a whole window, roof window or glazed external door is building work. It has to be notified to building control, either by an installer registered with a competent person scheme such as FENSA or Certass, or through a building notice to the council. Replacing only the glass in an existing frame is a repair and is not notifiable.

Choosing your roof lanterns

Solar-control glass

Neutral or blue-tinted coatings that reduce heat build-up under south or west-facing lanterns while keeping daylight levels high.

Opening vents

Manual or electric vents in the lantern or skylight, with optional rain sensors that close them automatically in wet weather.

Square or octagonal lantern

A pyramid or eight-sided design that suits square rooms, orangeries and spaces where a central focal point is wanted.

Roof Lanterns in Widnes: questions

Does fitting a roof lantern need building regulations approval?

A new roof lantern or skylight generally needs building regulations approval, because the roof structure is cut and must be supported, and the unit must meet energy standards. Fire performance also matters near a boundary. Replacing a lantern on an existing sound upstand is simpler, and we explain which route applies at survey.

How do I clean a roof lantern?

Self-cleaning coated glass lets rain lift most dirt, but a rinse with clean water in long dry spells helps. Clean from a safe position at the roof edge or from a suitable platform, never by standing on the lantern. Wipe the inside glass with mild soapy water, and keep leaves clear of the upstand and roof outlets.

Can I replace my old polycarbonate roof lantern with glass?

Yes, in most cases. A glass lantern is heavier than polycarbonate, so the upstand and roof structure must be able to carry it. If the upstand is sound, level and the right size, a new aluminium lantern can usually sit on it. If not, the upstand is rebuilt first, which the survey will identify.

How long does it take to fit a roof lantern?

Fitting a roof lantern on a prepared upstand usually takes a day or less for a typical size, longer for large or complex shapes. The lantern is made to order first, and the lead time depends on its size, shape and colour. Building or rebuilding an upstand is separate roofing work that comes before fitting.

Do you cover Widnes for roof lanterns?

Yes. We can quote for roof lanterns across Widnes and the surrounding Cheshire area, including postcode districts WA8 and WA7, and nearby Runcorn, Halewood and Speke. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Widnes

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote