Wrexham · Clwyd
Sash Windows in Wrexham
Rattling, rotten or stuck sashes in Wrexham can often be replaced while keeping your original box frames, linings and architraves where the timber is sound.
- LL13
- LL11
- LL12
- Guide from £1,495
About uPVC sliding sash windows in Wrexham
Sash windows that run smoothly need routine care: keep the pulley wheels free of paint, wax or lightly lubricate the running channels, check the cords for fraying, and repaint timber before bare wood shows. Draught brush seals in the beads and meeting rails reduce rattles and heat loss.
A traditional box sash hides cast-iron or lead weights inside the side boxes of the frame, connected to each sash by cords running over pulleys. Modern sash windows often use spiral or spring balances instead, which take up less depth and suit uPVC and some new timber designs without weight pockets.
Security on sash windows comes from keyed sash locks at the meeting rails, sash stops that limit the opening for ventilation and child safety, laminated glass, and close-fitting staff and parting beads. Ground-floor sashes in older houses are often the weakest point, so locks are worth upgrading during replacement.
Slim double glazed units let sash windows keep fine glazing bars and traditional proportions while improving thermal performance. Bars can be true divisions with individual units, or bars bonded to both faces of a single unit with a spacer bar between the panes, which looks very similar from a short distance.
What's included
- Survey recording mouldings, horns, bars and box condition
- Removal of old sashes or frames and disposal
- Weights or balances set for smooth, even sliding
- Sealing, finishing and written guarantee terms
About Wrexham for this job
- Postcodes covered
- LL13, LL11, LL12 and the surrounding area, including Rhosllannerchrugog, Buckley and Hawarden
- Coast
- Wrexham is well inland, around 24 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Wrexham the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. Glazing bars and deep frames reduce daylight, so slimmer bars and high light-transmission low-E glass help north-facing rooms. Tall south-facing sashes can let in strong summer sun; the top sash can be lowered to vent warm air out at high level.
- Access and setting
- Terraced streets and conservation areas often control sash details on front elevations, so check requirements before ordering. Flats need planning permission and freeholder consent, and upper-floor sashes are usually fitted from inside, with careful protection of communal stairs and hallways.
- Rules in Wales
- In Wales, Approved Document N covers safety glazing: safety glass is needed in and around doors and in low-level glazing where people could walk into it.
Guide prices in Wrexham
| Typical job | Guide price inc VAT |
|---|---|
| uPVC sliding sash, 900 × 1500 mm | £1,495 – £1,995 |
| Timber-effect uPVC sash, 900 × 1500 mm | £1,795 – £2,295 |
| Painted timber sash, 900 × 1500 mm | £2,595 – £3,295 |
Get a guide price for your size
Like-for-like replacement windows on houses in Wales are usually permitted development, but flats, listed buildings and conservation areas can need permission. Check with the local planning authority.
Options to choose between
uPVC sliding sash
Low-maintenance uPVC frames with sculpted profiles and optional woodgrain foils, suited to homes where planning rules allow uPVC.
Timber box sash
Traditional weights, cords and pulleys in a box frame, made in engineered softwood or hardwood and factory painted to your colour.
Glazing bar patterns
Two over two, six over six or other bar layouts, as true divisions or bars bonded to the glass faces.
Sash Windows in Wrexham: questions
How much do sash windows cost?
The cost of sash windows depends on size, material, whether you replace the whole frame or only the sashes, the glazing bar pattern, the glass and the finishing details such as horns and mouldings. Timber usually costs more than uPVC, and listed building work costs more again. See the guide prices for typical ranges; the written quote fixes your price.
Can I have double glazed sash windows in a listed building?
Sometimes, but listed building consent is needed for significant works, and some councils will only accept repair of the original windows or slim double glazing with matching details. Secondary glazing is often accepted where new windows are not. Speak to your council's conservation officer before ordering; we can provide drawings and specifications to support an application.
Should I repair or replace my sash windows?
Repair suits sashes where the timber is mostly sound and only cords, beads or small sections need attention, especially in listed or conservation properties. Replacement suits frames with widespread rot, distortion or repeated failures, or where you want double glazing and better security. A survey of each window shows which approach makes sense, and we can quote either.
What maintenance do timber sash windows need?
Timber sash windows need periodic repainting, how often depends on exposure, orientation and colour, plus routine checks of cords, pulleys and seals. Keep paint off the running surfaces, clean the sills and touch up chips before water gets in. Factory-finished timber lasts longer between coats than site-painted joinery, but still benefits from yearly inspection.
Do you cover Wrexham for sash windows?
Yes. We can quote for sash windows across Wrexham and the surrounding Clwyd area, including postcode districts LL13, LL11 and LL12, and nearby Rhosllannerchrugog, Buckley and Hawarden. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Wrexham
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.