Colne · Lancashire
Sash Windows in Colne
Period homes in Colne can keep the look of traditional sliding sashes while gaining double glazing, smoother running and stronger locks from our made-to-measure sash windows.
- BB8
- BB9
- Guide from £1,495
About uPVC sliding sash windows in Colne
Timber sash windows are usually made from engineered softwood or durable hardwoods, factory primed and finished with microporous paint that lets moisture escape. Factory finishing gives a more even coat than painting on site, but timber still needs periodic redecoration, and the interval depends on exposure and colour.
In England, Approved Document L allows an alternative where a window must keep a building's character: a centre-pane U-value no worse than 1.2 W/m²K, or single glazing supplemented by low-E secondary glazing. Otherwise a replacement should meet 1.4 W/m²K or Window Energy Rating band B.
A traditional box sash hides cast-iron or lead weights inside the side boxes of the frame, connected to each sash by cords running over pulleys. Modern sash windows often use spiral or spring balances instead, which take up less depth and suit uPVC and some new timber designs without weight pockets.
Sash windows that run smoothly need routine care: keep the pulley wheels free of paint, wax or lightly lubricate the running channels, check the cords for fraying, and repaint timber before bare wood shows. Draught brush seals in the beads and meeting rails reduce rattles and heat loss.
What you get
- Removal of old sashes or frames and disposal
- Survey recording mouldings, horns, bars and box condition
- Weights or balances set for smooth, even sliding
- Double glazed units, with safety glass where required
About Colne for this job
- Postcodes covered
- BB8, BB9 and the surrounding area, including Nelson (Lancashire), Burnley and Skipton
- Coast
- Colne is well inland, around 48 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Colne the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.1 hours of daylight, rising to about 60° and 16.9 hours in midsummer. Glazing bars and deep frames reduce daylight, so slimmer bars and high light-transmission low-E glass help north-facing rooms. Tall south-facing sashes can let in strong summer sun; the top sash can be lowered to vent warm air out at high level.
- Access and setting
- Older rural houses often have sash openings that are out of square, with soft stone or lime plaster around them, so each window is measured individually and fitted gently. Exposed sites benefit from draught seals and robust weatherboards on the bottom sash.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Colne
| Typical job | Guide price inc VAT |
|---|---|
| uPVC sliding sash, 900 × 1500 mm | £1,495 – £1,995 |
| Timber-effect uPVC sash, 900 × 1500 mm | £1,795 – £2,295 |
| Painted timber sash, 900 × 1500 mm | £2,595 – £3,295 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Choosing your sash windows
Timber box sash
Traditional weights, cords and pulleys in a box frame, made in engineered softwood or hardwood and factory painted to your colour.
uPVC sliding sash
Low-maintenance uPVC frames with sculpted profiles and optional woodgrain foils, suited to homes where planning rules allow uPVC.
Glazing bar patterns
Two over two, six over six or other bar layouts, as true divisions or bars bonded to the glass faces.
Sash Windows in Colne: questions
How secure are sash windows?
New sash windows can be secure when fitted with keyed locks at the meeting rails, sash stops, laminated glass and tight-fitting beads. Older sashes often rely on a single catch, which is easily forced. Upgrading ground-floor and easily reached windows first makes sense, and the glazier can recommend locks that suit the sash and frame.
What maintenance do timber sash windows need?
Timber sash windows need periodic repainting, how often depends on exposure, orientation and colour, plus routine checks of cords, pulleys and seals. Keep paint off the running surfaces, clean the sills and touch up chips before water gets in. Factory-finished timber lasts longer between coats than site-painted joinery, but still benefits from yearly inspection.
What guarantee comes with new sash windows?
Manufacturer guarantees apply to the joinery, finish, sealed units and hardware, and the terms are confirmed in writing. Cover on the paint finish often depends on regular maintenance, so check the conditions. Guarantee terms for the installation are set out in writing with your quote, so you know what is covered before agreeing to go ahead.
How much do sash windows cost?
The cost of sash windows depends on size, material, whether you replace the whole frame or only the sashes, the glazing bar pattern, the glass and the finishing details such as horns and mouldings. Timber usually costs more than uPVC, and listed building work costs more again. See the guide prices for typical ranges; the written quote fixes your price.
Do you cover Colne for sash windows?
Yes. We can quote for sash windows across Colne and the surrounding Lancashire area, including postcode districts BB8 and BB9, and nearby Nelson (Lancashire), Burnley and Skipton. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Colne
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.