Selby · North Yorkshire
Sash Windows in Selby
If single glazed sashes in Selby stream with condensation every winter, double glazed replacements with draught seals can make rooms warmer and quieter.
- YO8
- Guide from £1,495
Double glazed sash windows in Selby: what to know
Trickle vents can be fitted discreetly in the head of a sash frame or the top rail. In England, Approved Document F expects ventilation after window replacement to be no worse than before, although listed buildings and conservation areas may meet it only where reasonably practicable, agreed with building control.
Sash window prices depend on size, timber or uPVC, whether you replace the whole frame or just the sashes, the glazing bar pattern, horns and mouldings, glass type and the paint colour. Listed or conservation work that needs matching details costs more. See the guide prices for typical ranges.
Security on sash windows comes from keyed sash locks at the meeting rails, sash stops that limit the opening for ventilation and child safety, laminated glass, and close-fitting staff and parting beads. Ground-floor sashes in older houses are often the weakest point, so locks are worth upgrading during replacement.
Heavy double glazed sashes need matching weights. When single glazed sashes are swapped for double glazed ones in an existing box, the old weights are usually too light, so the glazier re-weighs each sash to stop it dropping or creeping up, and checks the pulleys can carry the load.
What you get
- Made-to-measure timber or uPVC sash windows
- Sealing, finishing and written guarantee terms
- Weights or balances set for smooth, even sliding
- Survey recording mouldings, horns, bars and box condition
Working in Selby
- Postcodes covered
- YO8 and the surrounding area, including Goole, Pontefract and York
- Coast
- Selby is well inland, around 25 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Selby the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.2 hours of daylight, rising to about 60° and 16.8 hours in midsummer. Glazing bars and deep frames reduce daylight, so slimmer bars and high light-transmission low-E glass help north-facing rooms. Tall south-facing sashes can let in strong summer sun; the top sash can be lowered to vent warm air out at high level.
- Access and setting
- Older rural houses often have sash openings that are out of square, with soft stone or lime plaster around them, so each window is measured individually and fitted gently. Exposed sites benefit from draught seals and robust weatherboards on the bottom sash.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Selby
| Typical job | Guide price inc VAT |
|---|---|
| uPVC sliding sash, 900 × 1500 mm | £1,495 – £1,995 |
| Timber-effect uPVC sash, 900 × 1500 mm | £1,795 – £2,295 |
| Painted timber sash, 900 × 1500 mm | £2,595 – £3,295 |
Get a guide price for your size
Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Choosing your sash windows
Timber box sash
Traditional weights, cords and pulleys in a box frame, made in engineered softwood or hardwood and factory painted to your colour.
Tilt-in sashes
Sashes that tilt inwards for cleaning upper-floor glass from inside, and can help provide an escape opening.
uPVC sliding sash
Low-maintenance uPVC frames with sculpted profiles and optional woodgrain foils, suited to homes where planning rules allow uPVC.
Sash Windows in Selby: questions
How long does it take to replace sash windows?
Fitting a single sash window usually takes most of a day, longer where the box frame is removed or plaster disturbed. A whole house typically takes several days on site. The windows are made to order first, and timber sashes with special details take longer to manufacture; the lead time is confirmed in writing with your quote.
How much do sash windows cost?
The cost of sash windows depends on size, material, whether you replace the whole frame or only the sashes, the glazing bar pattern, the glass and the finishing details such as horns and mouldings. Timber usually costs more than uPVC, and listed building work costs more again. See the guide prices for typical ranges; the written quote fixes your price.
How secure are sash windows?
New sash windows can be secure when fitted with keyed locks at the meeting rails, sash stops, laminated glass and tight-fitting beads. Older sashes often rely on a single catch, which is easily forced. Upgrading ground-floor and easily reached windows first makes sense, and the glazier can recommend locks that suit the sash and frame.
Are uPVC sash windows allowed in conservation areas?
It depends on the council. Some conservation areas and Article 4 directions require timber on front elevations, while others accept well-detailed uPVC sashes with sculpted profiles and run-through horns. Listed buildings almost always need timber. Check your council's guidance or ask the planning department before choosing uPVC, because removing unauthorised windows later is costly.
Do you cover Selby for sash windows?
Yes. We can quote for sash windows across Selby and the surrounding North Yorkshire area, including postcode districts YO8, and nearby Goole, Pontefract and York. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Selby
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.