Bicester · Oxfordshire
Sash Windows in Bicester
Rattling, rotten or stuck sashes in Bicester can often be replaced while keeping your original box frames, linings and architraves where the timber is sound.
- OX6
- OX26
- Guide from £1,495
Sash windows across Bicester
Sash windows that run smoothly need routine care: keep the pulley wheels free of paint, wax or lightly lubricate the running channels, check the cords for fraying, and repaint timber before bare wood shows. Draught brush seals in the beads and meeting rails reduce rattles and heat loss.
In England, Approved Document L allows an alternative where a window must keep a building's character: a centre-pane U-value no worse than 1.2 W/m²K, or single glazing supplemented by low-E secondary glazing. Otherwise a replacement should meet 1.4 W/m²K or Window Energy Rating band B.
A traditional box sash hides cast-iron or lead weights inside the side boxes of the frame, connected to each sash by cords running over pulleys. Modern sash windows often use spiral or spring balances instead, which take up less depth and suit uPVC and some new timber designs without weight pockets.
Heavy double glazed sashes need matching weights. When single glazed sashes are swapped for double glazed ones in an existing box, the old weights are usually too light, so the glazier re-weighs each sash to stop it dropping or creeping up, and checks the pulleys can carry the load.
What's included
- Weights or balances set for smooth, even sliding
- Made-to-measure timber or uPVC sash windows
- Double glazed units, with safety glass where required
- Removal of old sashes or frames and disposal
Bicester at a glance
- Postcodes covered
- OX6, OX26 and the surrounding area, including Oxford, Thame and Banbury
- Coast
- Bicester is well inland, around 86 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Bicester the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.5 hours of daylight, rising to about 62° and 16.5 hours in midsummer. Glazing bars and deep frames reduce daylight, so slimmer bars and high light-transmission low-E glass help north-facing rooms. Tall south-facing sashes can let in strong summer sun; the top sash can be lowered to vent warm air out at high level.
- Access and setting
- Older rural houses often have sash openings that are out of square, with soft stone or lime plaster around them, so each window is measured individually and fitted gently. Exposed sites benefit from draught seals and robust weatherboards on the bottom sash.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Bicester
| Typical job | Guide price inc VAT |
|---|---|
| uPVC sliding sash, 900 × 1500 mm | £1,495 – £1,995 |
| Timber-effect uPVC sash, 900 × 1500 mm | £1,795 – £2,295 |
| Painted timber sash, 900 × 1500 mm | £2,595 – £3,295 |
Get a guide price for your size
Listed buildings in England need listed building consent for most changes to historic windows or glass, and conservation areas can restrict changes visible from the street. Speak to the council's conservation officer before ordering.
Options to choose between
Replacement sashes only
New double glazed sashes fitted into your existing sound box frame, keeping original linings, architraves and plasterwork.
Heritage glass options
Slim double glazing, low-E coatings and textured glass that looks like old cylinder glass for sensitive elevations.
Spring-balanced timber sash
Timber sashes running on concealed spring balances, giving a slimmer frame where weight pockets are not needed or space is tight.
Sash Windows in Bicester: questions
Are uPVC sash windows allowed in conservation areas?
It depends on the council. Some conservation areas and Article 4 directions require timber on front elevations, while others accept well-detailed uPVC sashes with sculpted profiles and run-through horns. Listed buildings almost always need timber. Check your council's guidance or ask the planning department before choosing uPVC, because removing unauthorised windows later is costly.
How secure are sash windows?
New sash windows can be secure when fitted with keyed locks at the meeting rails, sash stops, laminated glass and tight-fitting beads. Older sashes often rely on a single catch, which is easily forced. Upgrading ground-floor and easily reached windows first makes sense, and the glazier can recommend locks that suit the sash and frame.
What maintenance do timber sash windows need?
Timber sash windows need periodic repainting, how often depends on exposure, orientation and colour, plus routine checks of cords, pulleys and seals. Keep paint off the running surfaces, clean the sills and touch up chips before water gets in. Factory-finished timber lasts longer between coats than site-painted joinery, but still benefits from yearly inspection.
How much do sash windows cost?
The cost of sash windows depends on size, material, whether you replace the whole frame or only the sashes, the glazing bar pattern, the glass and the finishing details such as horns and mouldings. Timber usually costs more than uPVC, and listed building work costs more again. See the guide prices for typical ranges; the written quote fixes your price.
Do you cover Bicester for sash windows?
Yes. We can quote for sash windows across Bicester and the surrounding Oxfordshire area, including postcode districts OX6 and OX26, and nearby Oxford, Thame and Banbury. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Bicester
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.