Bedworth · Warwickshire
Sash Windows in Bedworth
Living in a conservation area or listed building in Bedworth? We can prepare sash window specifications and drawings to support your consent application.
- CV12
- Guide from £1,495
uPVC sliding sash windows in Bedworth
Trickle vents can be fitted discreetly in the head of a sash frame or the top rail. In England, Approved Document F expects ventilation after window replacement to be no worse than before, although listed buildings and conservation areas may meet it only where reasonably practicable, agreed with building control.
In England, Approved Document L allows an alternative where a window must keep a building's character: a centre-pane U-value no worse than 1.2 W/m²K, or single glazing supplemented by low-E secondary glazing. Otherwise a replacement should meet 1.4 W/m²K or Window Energy Rating band B.
Sash windows that run smoothly need routine care: keep the pulley wheels free of paint, wax or lightly lubricate the running channels, check the cords for fraying, and repaint timber before bare wood shows. Draught brush seals in the beads and meeting rails reduce rattles and heat loss.
Slim double glazed units let sash windows keep fine glazing bars and traditional proportions while improving thermal performance. Bars can be true divisions with individual units, or bars bonded to both faces of a single unit with a spacer bar between the panes, which looks very similar from a short distance.
What you get
- Weights or balances set for smooth, even sliding
- Sealing, finishing and written guarantee terms
- Double glazed units, with safety glass where required
- Made-to-measure timber or uPVC sash windows

Local details for Bedworth
- Postcodes covered
- CV12 and the surrounding area, including Nuneaton, Coventry and Hinckley
- Coast
- Bedworth is well inland, around 100 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Bedworth the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Glazing bars and deep frames reduce daylight, so slimmer bars and high light-transmission low-E glass help north-facing rooms. Tall south-facing sashes can let in strong summer sun; the top sash can be lowered to vent warm air out at high level.
- Access and setting
- Older rural houses often have sash openings that are out of square, with soft stone or lime plaster around them, so each window is measured individually and fitted gently. Exposed sites benefit from draught seals and robust weatherboards on the bottom sash.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Bedworth
| Typical job | Guide price inc VAT |
|---|---|
| uPVC sliding sash, 900 × 1500 mm | £1,495 – £1,995 |
| Timber-effect uPVC sash, 900 × 1500 mm | £1,795 – £2,295 |
| Painted timber sash, 900 × 1500 mm | £2,595 – £3,295 |
Get a guide price for your size
Approved Document F covers ventilation. Replacing windows should not leave a room with worse background ventilation than before, which is why replacement windows often include trickle vents.
Specification choices
Timber box sash
Traditional weights, cords and pulleys in a box frame, made in engineered softwood or hardwood and factory painted to your colour.
Tilt-in sashes
Sashes that tilt inwards for cleaning upper-floor glass from inside, and can help provide an escape opening.
Replacement sashes only
New double glazed sashes fitted into your existing sound box frame, keeping original linings, architraves and plasterwork.
Sash Windows in Bedworth: questions
What maintenance do timber sash windows need?
Timber sash windows need periodic repainting, how often depends on exposure, orientation and colour, plus routine checks of cords, pulleys and seals. Keep paint off the running surfaces, clean the sills and touch up chips before water gets in. Factory-finished timber lasts longer between coats than site-painted joinery, but still benefits from yearly inspection.
Will double glazed sashes be too heavy for my existing frame?
Double glazed sashes are heavier than single glazed ones, so the box frame, pulleys and weights must cope. When new sashes go into an existing box, the glazier checks the pulleys and adds or replaces weights so each sash balances. If the box is weak or rotten, a new frame is the better option, and the survey will tell you.
How much do sash windows cost?
The cost of sash windows depends on size, material, whether you replace the whole frame or only the sashes, the glazing bar pattern, the glass and the finishing details such as horns and mouldings. Timber usually costs more than uPVC, and listed building work costs more again. See the guide prices for typical ranges; the written quote fixes your price.
Are uPVC sash windows allowed in conservation areas?
It depends on the council. Some conservation areas and Article 4 directions require timber on front elevations, while others accept well-detailed uPVC sashes with sculpted profiles and run-through horns. Listed buildings almost always need timber. Check your council's guidance or ask the planning department before choosing uPVC, because removing unauthorised windows later is costly.
Do you cover Bedworth for sash windows?
Yes. We can quote for sash windows across Bedworth and the surrounding Warwickshire area, including postcode districts CV12, and nearby Nuneaton, Coventry and Hinckley. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Bedworth
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.