Irvine · Ayrshire
Secondary Glazing in Irvine
Our surveyors can measure windows across Irvine for secondary glazing, checking reveal depth, opening style and fire escape needs before quoting.
- KA11
- KA12
- Guide from £465
Secondary glazing listed buildings for homes and businesses in Irvine
If an existing window is relied on for escape in a fire, the secondary glazing in front of it must open easily and give enough clear opening. The surveyor checks which windows are escape windows, so the opening style and catches do not block a way out.
Condensation in the gap between the two windows is reduced by making the secondary unit the more airtight of the two. The original window should not be fully sealed, so any moisture that gets into the cavity can escape outside rather than being trapped against the glass.
Glass for secondary glazing is heavy, so the frames need firm fixings into the reveal or a supporting sub-frame. The surveyor checks that plaster, timber linings and window boards are sound enough to carry the weight, and allows for any packing needed in uneven reveals.
For noise reduction, the size of the air gap between the original window and the secondary unit matters a great deal, and a wider cavity generally performs better. Acoustic laminated glass and well-sealed frames improve results further, especially against traffic, rail and aircraft noise.
What a typical job includes
- Made-to-measure slim aluminium frames and glass
- Written quote fixing the price for the specification
- Fitting, sealing and checking every opening panel
- Removal of packaging and cleaning of new glass
Working in Irvine
- Postcodes covered
- KA11, KA12 and the surrounding area, including Kilwinning, Saltcoats and Troon
- Coast
- Irvine is about 3 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Coastal properties often have older windows exposed to wind-driven rain and draughts. Secondary glazing adds a sealed inner layer that reduces draughts and cold, while the original window keeps out the weather and its condition is protected from inside.
- Daylight and sun
- In Irvine the midwinter sun reaches about 11° above the horizon at noon, with roughly 6.8 hours of daylight, rising to about 58° and 17.2 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in Scotland
- Section 4 (Safety) of the Scottish Technical Handbooks covers glazing that people could collide with, such as glass in and beside doors and low-level glazing, where safety glass is needed.
Guide prices in Irvine
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Listed buildings in Scotland need listed building consent for most changes to historic windows; Historic Environment Scotland publishes guidance on traditional windows.
What you can choose
Low-E glass
Coated glass that reflects heat back into the room, improving insulation when the original window is single glazed.
Fixed panel
A non-opening unit for windows never opened, giving the most airtight seal for noise and draught reduction.
Lift-out panel
A lightweight panel that lifts out of its frame, for windows rarely opened, giving a slim and economical secondary unit.
Secondary Glazing in Irvine: questions
How do I clean and look after secondary glazing?
Open or remove the panels as designed, then clean the glass with mild soapy water and a soft cloth. Wipe the aluminium frames and runners, and keep tracks free of dust so panels slide smoothly. Check seals and catches occasionally. Avoid abrasive cleaners, which can scratch coated glass.
Will secondary glazing cause condensation?
It can, if the original window is sealed tighter than the secondary unit, because warm, moist room air then gets trapped in the cavity. The secondary unit should be the more airtight of the two, and the original window should not be fully sealed. Opening the secondary panel lets room air into the cavity, so close it again afterwards.
Is secondary glazing suitable for rented homes and flats?
Yes. Secondary glazing is fitted inside, so it often avoids the external changes that leases, freeholders or planning rules restrict. It can be removed later with limited making good. Leaseholders should still check their lease for any rules on internal alterations, and landlords should check escape routes are not affected.
Can I still open my original windows?
Yes, as long as the secondary glazing has an opening panel in front of the part you need to open. Sliding and hinged panels give access to the original window for ventilation and cleaning. Lift-out and fixed panels suit windows you rarely or never open.
Do you cover Irvine for secondary glazing?
Yes. We can quote for secondary glazing across Irvine and the surrounding Ayrshire area, including postcode districts KA11 and KA12, and nearby Kilwinning, Saltcoats and Troon. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Irvine
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.