Call 0800 088 6248

Ellesmere Port · Cheshire

Secondary Glazing in Ellesmere Port

Is traffic noise getting through the windows of your home in Ellesmere Port? We can quote for acoustic secondary glazing tailored to each opening.

  • CH64
  • CH65
  • CH66
  • Guide from £465

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Secondary glazing for sash windows across Ellesmere Port

Condensation in the gap between the two windows is reduced by making the secondary unit the more airtight of the two. The original window should not be fully sealed, so any moisture that gets into the cavity can escape outside rather than being trapped against the glass.

Opening styles include vertical sliders that line up with sash window meeting rails, horizontal sliders for wide openings, hinged casements, lift-out panels for windows that are rarely opened, and fixed panes. The choice depends on how you use the window, cleaning access and fire escape needs.

A low-emissivity coating on the secondary glass reflects heat back into the room and improves the insulation of the combined window. It is a useful choice for single-glazed sash and casement windows where the originals must be kept for character or planning reasons.

Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.

Included as standard

  • Removal of packaging and cleaning of new glass
  • Written quote fixing the price for the specification
  • Survey of each window, reveal depth and sightlines
  • Advice on opening style, glass and fire escape
Sash window with secondary glazing in a period sitting room

About Ellesmere Port for this job

Postcodes covered
CH64, CH65, CH66 and the surrounding area, including Garston, Speke and Chester
Coast
Ellesmere Port is about 3 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Coastal properties often have older windows exposed to wind-driven rain and draughts. Secondary glazing adds a sealed inner layer that reduces draughts and cold, while the original window keeps out the weather and its condition is protected from inside.
Daylight and sun
In Ellesmere Port the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
Access and setting
In city centres and busy streets, acoustic secondary glazing is a common response to traffic, rail and nightlife noise. Flats, listed buildings and conservation areas often limit external changes, which makes internal secondary glazing a practical option.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Ellesmere Port

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Slider, 900 × 1200 mm£465 – £595
Slider, 1200 × 1600 mm£665 – £845
Acoustic glass, 1000 × 1400 mm£675 – £865

Get a guide price for your size

Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.

Specification choices

Fixed panel

A non-opening unit for windows never opened, giving the most airtight seal for noise and draught reduction.

Lift-out panel

A lightweight panel that lifts out of its frame, for windows rarely opened, giving a slim and economical secondary unit.

Vertical sliding

Panels slide up and down, with meeting rails aligned to sash windows so the secondary unit is discreet from inside and outside.

Secondary Glazing in Ellesmere Port: questions

Is secondary glazing as good as double glazing?

It depends on the goal. For noise, secondary glazing is often more effective, because the wider gap between the two windows reduces sound better than the narrow cavity of a sealed unit. For heat, a well-sealed secondary unit with low-E glass significantly improves a single-glazed window. It also keeps original windows, which matters in listed buildings.

Does secondary glazing need safety glass?

It does in critical locations. In England, glass within 800mm of the floor, glass in doors and glass near doors are critical locations under Approved Document K, and these apply to secondary glazing too. Low-level secondary panes should be toughened or laminated safety glass. The surveyor checks each window during the survey.

Do I need permission for secondary glazing on a listed building?

You should seek listed building consent from the council's planning department before installing secondary glazing on a listed building. Secondary glazing is often seen as a reversible, low-impact change, but consent requirements depend on the building. Carrying out works that need consent without it is a criminal offence. If your home is not listed but is in a conservation area, check with the council if you are unsure.

Is secondary glazing suitable for rented homes and flats?

Yes. Secondary glazing is fitted inside, so it often avoids the external changes that leases, freeholders or planning rules restrict. It can be removed later with limited making good. Leaseholders should still check their lease for any rules on internal alterations, and landlords should check escape routes are not affected.

Do you cover Ellesmere Port for secondary glazing?

Yes. We can quote for secondary glazing across Ellesmere Port and the surrounding Cheshire area, including postcode districts CH64, CH65 and CH66, and nearby Garston, Speke and Chester. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Ellesmere Port

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote