Torquay · Devon
Secondary Glazing in Torquay
Single-glazed sash windows in Torquay can stay as they are, with vertical sliding secondary glazing fitted inside to reduce draughts and cold.
- TQ1
- TQ2
- TQ3
- TQ4
- Guide from £465
Acoustic secondary glazing in Torquay
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
Low-level secondary glazing is still glazing, so the safety glazing rules for critical locations apply. In England, Approved Document K treats glass within 800mm of the floor as a critical location, so low-level secondary panes should be toughened or laminated safety glass.
Condensation in the gap between the two windows is reduced by making the secondary unit the more airtight of the two. The original window should not be fully sealed, so any moisture that gets into the cavity can escape outside rather than being trapped against the glass.
For noise reduction, the size of the air gap between the original window and the secondary unit matters a great deal, and a wider cavity generally performs better. Acoustic laminated glass and well-sealed frames improve results further, especially against traffic, rail and aircraft noise.
Included as standard
- Advice on opening style, glass and fire escape
- Removal of packaging and cleaning of new glass
- Made-to-measure slim aluminium frames and glass
- Fitting, sealing and checking every opening panel
About Torquay for this job
- Postcodes covered
- TQ1, TQ2, TQ3, TQ4 and the surrounding area, including Paignton, Newton Abbot and Exmouth
- Coast
- Torquay is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Coastal properties often have older windows exposed to wind-driven rain and draughts. Secondary glazing adds a sealed inner layer that reduces draughts and cold, while the original window keeps out the weather and its condition is protected from inside.
- Daylight and sun
- In Torquay the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.8 hours of daylight, rising to about 63° and 16.2 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- In city centres and busy streets, acoustic secondary glazing is a common response to traffic, rail and nightlife noise. Flats, listed buildings and conservation areas often limit external changes, which makes internal secondary glazing a practical option.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Torquay
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
What you can choose
Horizontal sliding
Panels slide sideways, suiting wide casement windows and openings where you need regular access for cleaning or ventilation.
Vertical sliding
Panels slide up and down, with meeting rails aligned to sash windows so the secondary unit is discreet from inside and outside.
Hinged casement
Panels open inwards like a door, giving full access to the original window, and can be chosen for escape windows.
Secondary Glazing in Torquay: questions
How much noise does secondary glazing block?
Results depend on the size of the gap between the windows, the glass type and thickness, the seals and the original window. A larger cavity and acoustic laminated glass give the strongest improvement. The survey checks reveal depth and noise sources, so the specification can be tailored to the noise you are dealing with.
Which opening style should I choose?
Choose based on how you use the window. Vertical sliders suit sash windows and keep meeting rails aligned. Horizontal sliders suit wide windows. Hinged panels give full access for cleaning and escape. Lift-out and fixed panels suit windows that are rarely or never opened, and give the tightest seal for noise.
How do I clean and look after secondary glazing?
Open or remove the panels as designed, then clean the glass with mild soapy water and a soft cloth. Wipe the aluminium frames and runners, and keep tracks free of dust so panels slide smoothly. Check seals and catches occasionally. Avoid abrasive cleaners, which can scratch coated glass.
Does secondary glazing need safety glass?
It does in critical locations. In England, glass within 800mm of the floor, glass in doors and glass near doors are critical locations under Approved Document K, and these apply to secondary glazing too. Low-level secondary panes should be toughened or laminated safety glass. The surveyor checks each window during the survey.
Do you cover Torquay for secondary glazing?
Yes. We can quote for secondary glazing across Torquay and the surrounding Devon area, including postcode districts TQ1, TQ2, TQ3 and TQ4, and nearby Paignton, Newton Abbot and Exmouth. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Torquay
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.