Blackheath · Greater London
Secondary Glazing in Blackheath
Where planning or lease rules limit changes to the outside, secondary glazing in Blackheath offers an internal option that can be removed later.
- SE3
- SE13
- SE10
- Guide from £465
Blackheath: secondary glazing for sash windows
Secondary glazing can also add security, because an intruder would have to break through two separate windows. Laminated glass and locking catches on the secondary unit add further resistance, which is useful for ground-floor and basement windows in period properties.
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
Low-level secondary glazing is still glazing, so the safety glazing rules for critical locations apply. In England, Approved Document K treats glass within 800mm of the floor as a critical location, so low-level secondary panes should be toughened or laminated safety glass.
Slim aluminium frames are designed to sit within the window reveal and line up with the original glazing bars or meeting rails. Matching sightlines keeps the secondary unit discreet from outside and inside, which matters for period homes and conservation areas.
What you get
- Fitting, sealing and checking every opening panel
- Survey of each window, reveal depth and sightlines
- Made-to-measure slim aluminium frames and glass
- Removal of packaging and cleaning of new glass
About Blackheath for this job
- Postcodes covered
- SE3, SE13, SE10 and the surrounding area, including Greenwich, Lewisham and Catford
- Coast
- Blackheath is well inland, around 25 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Blackheath the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Blackheath
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
Choosing your secondary glazing
Hinged casement
Panels open inwards like a door, giving full access to the original window, and can be chosen for escape windows.
Low-E glass
Coated glass that reflects heat back into the room, improving insulation when the original window is single glazed.
Lift-out panel
A lightweight panel that lifts out of its frame, for windows rarely opened, giving a slim and economical secondary unit.
Secondary Glazing in Blackheath: questions
Which opening style should I choose?
Choose based on how you use the window. Vertical sliders suit sash windows and keep meeting rails aligned. Horizontal sliders suit wide windows. Hinged panels give full access for cleaning and escape. Lift-out and fixed panels suit windows that are rarely or never opened, and give the tightest seal for noise.
Is secondary glazing suitable for rented homes and flats?
Yes. Secondary glazing is fitted inside, so it often avoids the external changes that leases, freeholders or planning rules restrict. It can be removed later with limited making good. Leaseholders should still check their lease for any rules on internal alterations, and landlords should check escape routes are not affected.
Does secondary glazing need safety glass?
It does in critical locations. In England, glass within 800mm of the floor, glass in doors and glass near doors are critical locations under Approved Document K, and these apply to secondary glazing too. Low-level secondary panes should be toughened or laminated safety glass. The surveyor checks each window during the survey.
How do I clean and look after secondary glazing?
Open or remove the panels as designed, then clean the glass with mild soapy water and a soft cloth. Wipe the aluminium frames and runners, and keep tracks free of dust so panels slide smoothly. Check seals and catches occasionally. Avoid abrasive cleaners, which can scratch coated glass.
Do you cover Blackheath for secondary glazing?
Yes. We can quote for secondary glazing across Blackheath and the surrounding Greater London area, including postcode districts SE3, SE13 and SE10, and nearby Greenwich, Lewisham and Catford. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Blackheath
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.