Hampton · Greater London
Secondary Glazing in Hampton
Is traffic noise getting through the windows of your home in Hampton? We can quote for acoustic secondary glazing tailored to each opening.
- TW12
- KT8
- TW11
- Guide from £465
Secondary glazing in Hampton: what to know
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
Glass for secondary glazing is heavy, so the frames need firm fixings into the reveal or a supporting sub-frame. The surveyor checks that plaster, timber linings and window boards are sound enough to carry the weight, and allows for any packing needed in uneven reveals.
Owners of listed buildings should seek listed building consent before installing secondary glazing, as the requirements depend on the building and the council. Secondary glazing is often seen as a minimal, reversible change, but carrying out works that need consent without it is a criminal offence.
Slim aluminium frames are designed to sit within the window reveal and line up with the original glazing bars or meeting rails. Matching sightlines keeps the secondary unit discreet from outside and inside, which matters for period homes and conservation areas.
What's included
- Survey of each window, reveal depth and sightlines
- Written quote fixing the price for the specification
- Advice on opening style, glass and fire escape
- Removal of packaging and cleaning of new glass
About Hampton for this job
- Postcodes covered
- TW12, KT8, TW11 and the surrounding area, including Hanworth, Sunbury-on-Thames and Walton-on-Thames
- Coast
- Hampton is well inland, around 51 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Hampton the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Hampton
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
What you can choose
Fixed panel
A non-opening unit for windows never opened, giving the most airtight seal for noise and draught reduction.
Vertical sliding
Panels slide up and down, with meeting rails aligned to sash windows so the secondary unit is discreet from inside and outside.
Hinged casement
Panels open inwards like a door, giving full access to the original window, and can be chosen for escape windows.
Secondary Glazing in Hampton: questions
Does secondary glazing need safety glass?
It does in critical locations. In England, glass within 800mm of the floor, glass in doors and glass near doors are critical locations under Approved Document K, and these apply to secondary glazing too. Low-level secondary panes should be toughened or laminated safety glass. The surveyor checks each window during the survey.
Do I need permission for secondary glazing on a listed building?
You should seek listed building consent from the council's planning department before installing secondary glazing on a listed building. Secondary glazing is often seen as a reversible, low-impact change, but consent requirements depend on the building. Carrying out works that need consent without it is a criminal offence. If your home is not listed but is in a conservation area, check with the council if you are unsure.
How do I clean and look after secondary glazing?
Open or remove the panels as designed, then clean the glass with mild soapy water and a soft cloth. Wipe the aluminium frames and runners, and keep tracks free of dust so panels slide smoothly. Check seals and catches occasionally. Avoid abrasive cleaners, which can scratch coated glass.
How much does secondary glazing cost?
The cost depends on the size and number of windows, the opening style, the type of glass, any arched or shaped heads, reveal depth and access. Acoustic and low-E glass cost more than standard clear glass, and shaped frames need more work. See the guide prices for typical windows, then get a written quote after the survey.
Do you cover Hampton for secondary glazing?
Yes. We can quote for secondary glazing across Hampton and the surrounding Greater London area, including postcode districts TW12, KT8 and TW11, and nearby Hanworth, Sunbury-on-Thames and Walton-on-Thames. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Hampton
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.