New Malden · Greater London
Secondary Glazing in New Malden
Period homes in New Malden can keep their character and gain comfort with discreet secondary glazing fitted inside the existing window reveals.
- KT3
- KT5
- KT1
- Guide from £465
Secondary glazing listed buildings in New Malden: what to know
Slim aluminium frames are designed to sit within the window reveal and line up with the original glazing bars or meeting rails. Matching sightlines keeps the secondary unit discreet from outside and inside, which matters for period homes and conservation areas.
Opening styles include vertical sliders that line up with sash window meeting rails, horizontal sliders for wide openings, hinged casements, lift-out panels for windows that are rarely opened, and fixed panes. The choice depends on how you use the window, cleaning access and fire escape needs.
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
Low-level secondary glazing is still glazing, so the safety glazing rules for critical locations apply. In England, Approved Document K treats glass within 800mm of the floor as a critical location, so low-level secondary panes should be toughened or laminated safety glass.
What you get
- Fitting, sealing and checking every opening panel
- Removal of packaging and cleaning of new glass
- Advice on opening style, glass and fire escape
- Written quote fixing the price for the specification
Working in New Malden
- Postcodes covered
- KT3, KT5, KT1 and the surrounding area, including Surbiton, Kingston upon Thames and Morden
- Coast
- New Malden is well inland, around 44 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In New Malden the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in New Malden
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Options to choose between
Low-E glass
Coated glass that reflects heat back into the room, improving insulation when the original window is single glazed.
Lift-out panel
A lightweight panel that lifts out of its frame, for windows rarely opened, giving a slim and economical secondary unit.
Hinged casement
Panels open inwards like a door, giving full access to the original window, and can be chosen for escape windows.
Secondary Glazing in New Malden: questions
Will secondary glazing cause condensation?
It can, if the original window is sealed tighter than the secondary unit, because warm, moist room air then gets trapped in the cavity. The secondary unit should be the more airtight of the two, and the original window should not be fully sealed. Opening the secondary panel lets room air into the cavity, so close it again afterwards.
Is secondary glazing as good as double glazing?
It depends on the goal. For noise, secondary glazing is often more effective, because the wider gap between the two windows reduces sound better than the narrow cavity of a sealed unit. For heat, a well-sealed secondary unit with low-E glass significantly improves a single-glazed window. It also keeps original windows, which matters in listed buildings.
Can I still open my original windows?
Yes, as long as the secondary glazing has an opening panel in front of the part you need to open. Sliding and hinged panels give access to the original window for ventilation and cleaning. Lift-out and fixed panels suit windows you rarely or never open.
How much does secondary glazing cost?
The cost depends on the size and number of windows, the opening style, the type of glass, any arched or shaped heads, reveal depth and access. Acoustic and low-E glass cost more than standard clear glass, and shaped frames need more work. See the guide prices for typical windows, then get a written quote after the survey.
Do you cover New Malden for secondary glazing?
Yes. We can quote for secondary glazing across New Malden and the surrounding Greater London area, including postcode districts KT3, KT5 and KT1, and nearby Surbiton, Kingston upon Thames and Morden. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in New Malden
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.