Hyde · Greater Manchester
Secondary Glazing in Hyde
Period homes in Hyde can keep their character and gain comfort with discreet secondary glazing fitted inside the existing window reveals.
- SK14
- SK16
- M34
- Guide from £465
Internal secondary windows for homes and businesses in Hyde
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
For noise reduction, the size of the air gap between the original window and the secondary unit matters a great deal, and a wider cavity generally performs better. Acoustic laminated glass and well-sealed frames improve results further, especially against traffic, rail and aircraft noise.
A low-emissivity coating on the secondary glass reflects heat back into the room and improves the insulation of the combined window. It is a useful choice for single-glazed sash and casement windows where the originals must be kept for character or planning reasons.
Glass for secondary glazing is heavy, so the frames need firm fixings into the reveal or a supporting sub-frame. The surveyor checks that plaster, timber linings and window boards are sound enough to carry the weight, and allows for any packing needed in uneven reveals.
What you get
- Advice on opening style, glass and fire escape
- Fitting, sealing and checking every opening panel
- Survey of each window, reveal depth and sightlines
- Removal of packaging and cleaning of new glass
About Hyde for this job
- Postcodes covered
- SK14, SK16, M34 and the surrounding area, including Denton, Dukinfield and Stalybridge
- Coast
- Hyde is well inland, around 47 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Hyde the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.2 hours of daylight, rising to about 60° and 16.8 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Hyde
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Listed buildings in England need listed building consent for most changes to historic windows or glass, and conservation areas can restrict changes visible from the street. Speak to the council's conservation officer before ordering.
What you can choose
Acoustic laminated glass
Laminated glass with a sound-dampening interlayer, combined with a generous cavity, for properties affected by traffic, rail or aircraft noise.
Fixed panel
A non-opening unit for windows never opened, giving the most airtight seal for noise and draught reduction.
Low-E glass
Coated glass that reflects heat back into the room, improving insulation when the original window is single glazed.
Secondary Glazing in Hyde: questions
Will secondary glazing cause condensation?
It can, if the original window is sealed tighter than the secondary unit, because warm, moist room air then gets trapped in the cavity. The secondary unit should be the more airtight of the two, and the original window should not be fully sealed. Opening the secondary panel lets room air into the cavity, so close it again afterwards.
How do I clean and look after secondary glazing?
Open or remove the panels as designed, then clean the glass with mild soapy water and a soft cloth. Wipe the aluminium frames and runners, and keep tracks free of dust so panels slide smoothly. Check seals and catches occasionally. Avoid abrasive cleaners, which can scratch coated glass.
Can I still open my original windows?
Yes, as long as the secondary glazing has an opening panel in front of the part you need to open. Sliding and hinged panels give access to the original window for ventilation and cleaning. Lift-out and fixed panels suit windows you rarely or never open.
Does secondary glazing need safety glass?
It does in critical locations. In England, glass within 800mm of the floor, glass in doors and glass near doors are critical locations under Approved Document K, and these apply to secondary glazing too. Low-level secondary panes should be toughened or laminated safety glass. The surveyor checks each window during the survey.
Do you cover Hyde for secondary glazing?
Yes. We can quote for secondary glazing across Hyde and the surrounding Greater Manchester area, including postcode districts SK14, SK16 and M34, and nearby Denton, Dukinfield and Stalybridge. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Hyde
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.