Loughborough · Leicestershire
Secondary Glazing in Loughborough
Our surveyors can measure windows across Loughborough for secondary glazing, checking reveal depth, opening style and fire escape needs before quoting.
- LE11
- LE12
- Guide from £465
Secondary glazing for sash windows in Loughborough: what to know
If an existing window is relied on for escape in a fire, the secondary glazing in front of it must open easily and give enough clear opening. The surveyor checks which windows are escape windows, so the opening style and catches do not block a way out.
Condensation in the gap between the two windows is reduced by making the secondary unit the more airtight of the two. The original window should not be fully sealed, so any moisture that gets into the cavity can escape outside rather than being trapped against the glass.
Glass for secondary glazing is heavy, so the frames need firm fixings into the reveal or a supporting sub-frame. The surveyor checks that plaster, timber linings and window boards are sound enough to carry the weight, and allows for any packing needed in uneven reveals.
A low-emissivity coating on the secondary glass reflects heat back into the room and improves the insulation of the combined window. It is a useful choice for single-glazed sash and casement windows where the originals must be kept for character or planning reasons.
What a typical job includes
- Written quote fixing the price for the specification
- Advice on opening style, glass and fire escape
- Survey of each window, reveal depth and sightlines
- Fitting, sealing and checking every opening panel
Loughborough at a glance
- Postcodes covered
- LE11, LE12 and the surrounding area, including Coalville, Leicester and Long Eaton
- Coast
- Loughborough is well inland, around 83 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Loughborough the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- In city centres and busy streets, acoustic secondary glazing is a common response to traffic, rail and nightlife noise. Flats, listed buildings and conservation areas often limit external changes, which makes internal secondary glazing a practical option.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Loughborough
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
What you can choose
Vertical sliding
Panels slide up and down, with meeting rails aligned to sash windows so the secondary unit is discreet from inside and outside.
Low-E glass
Coated glass that reflects heat back into the room, improving insulation when the original window is single glazed.
Lift-out panel
A lightweight panel that lifts out of its frame, for windows rarely opened, giving a slim and economical secondary unit.
Secondary Glazing in Loughborough: questions
Will secondary glazing cause condensation?
It can, if the original window is sealed tighter than the secondary unit, because warm, moist room air then gets trapped in the cavity. The secondary unit should be the more airtight of the two, and the original window should not be fully sealed. Opening the secondary panel lets room air into the cavity, so close it again afterwards.
How do I clean and look after secondary glazing?
Open or remove the panels as designed, then clean the glass with mild soapy water and a soft cloth. Wipe the aluminium frames and runners, and keep tracks free of dust so panels slide smoothly. Check seals and catches occasionally. Avoid abrasive cleaners, which can scratch coated glass.
Which opening style should I choose?
Choose based on how you use the window. Vertical sliders suit sash windows and keep meeting rails aligned. Horizontal sliders suit wide windows. Hinged panels give full access for cleaning and escape. Lift-out and fixed panels suit windows that are rarely or never opened, and give the tightest seal for noise.
Can I still open my original windows?
Yes, as long as the secondary glazing has an opening panel in front of the part you need to open. Sliding and hinged panels give access to the original window for ventilation and cleaning. Lift-out and fixed panels suit windows you rarely or never open.
Do you cover Loughborough for secondary glazing?
Yes. We can quote for secondary glazing across Loughborough and the surrounding Leicestershire area, including postcode districts LE11 and LE12, and nearby Coalville, Leicester and Long Eaton. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Loughborough
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.